LG LRE30757ST Owner's Manual (English) - Page 9

SURFACE CONTROLS COOKING English Español SETTING SURFACE CONTROLS When changing from a high heat setting to a lower heat setting, the surface unit may stop glowing. This is normal. To turn on a single surface unit (Right Rear, Left Rear, Left Front) 1. Press ON/OFF for the desired element position. The display will flash . (If no further pads are pressed within 10 seconds, the display will disappear.) 2. Press once to turn on the power level Hi or once for Lo. 3. Use the / to choose the desired power setting. / is continuously accessible. (Adjustable at any time while the element is ON.) 4. To turn off the unit after cooking, press ON/OFF once. Note: • Each time a pad is pressed a beep will sound. • The power level decreases or increases by 0.5 from 9.0 through 3.0. (by 0.2 from 3.0 through 1.0) • Lo is the lowest power level available. To turn on a dual surface unit (Right Front) 1. Press ON/OFF. The display will flash . (If no further pads are pressed within 10 seconds, the display will disappear.) 2. Press ELEMENT SIZE as needed to select the desired burner size. When first selected, 12" size is ON. The light above ELEMENT SIZE indicates which size surface unit is on. 3. Press once to turn on the power level Hi or once for Lo. 4. Use the / to choose the desired power setting. / is continuously accessible. (Adjustable at any time while the element is ON.) 5. To turn off the unit after cooking, press ON/OFF once. Note: • Each time a pad is pressed a beep will sound. • The power level decreases or increases by 0.5 from 9.0 through 3.0. (by 0.2 from 3.0 through 1.0) • Lo is the lowest power level available. Note: To scroll through the power levels quickly press and hold the or key pads until the power level desired is reached. Note: To scroll through the power levels quickly press and hold the or key pads until the power level desired is reached. CAUTION • DO NOT touch surface elements until it has cooled down sufficiently. - The surface elements may still be hot and burns may occur. CAUTION • DO NOT touch surface elements until it has cooled down sufficiently. - The surface elements may still be hot and burns may occur. Recommended Surface Cooking Settings Recommended setting for the single & dual elements. CAUTION • NEVER leave food unattended at high or medium-high setting. - Boilovers can cause smoking and greasy spillovers may catch on fire. Setting HIGH (8.5 - Hi) MEDIUM HIGH (5.5 - 8.0) MEDIUM (3.5 - 5.0) MEDIUM LOW (2.2 - 3.0) Type of cooking Start most foods, bring water to a boil or pan broiling. Continue a rapid boil, fry, or deep fat fry. Maintain a slow boil, thicken sauces and gravies, or steam vegetables. Keep foods cooking, poach, or stew (2.8 or lower is a simmer setting). LOW/SIMMER Keep warm, melt, or simmer. (Lo - 2.0) -9-