LG LRFC21755ST User Guide - Page 28

CONNECTING THE WATER LINE 9. CONNECT THE PIPE TO THE REFRIGERATOR Removing and Replacing a Cover Valve NOTE: • Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet. • If your refrigerator does not have a water filter, we recommend installing one. If your water supply has sand or particles that could clog the screen of the refrigerator's water valve. Install the filter in the water line near the refrigerator. 1. Loosen a screw on top of plastic cover. 4. Insert the pipe into the valve and fasten with spanner as shown in the figure below. 5. Bend the pipe to upwards and replace the cover into original position. And tighten the screw. 2. Lift off the cover by slightly pushing up. 3. Place a compression nut and a ferrule(sleeve) onto the end of pipe. Compression Nut Ferrule (sleeve) 29