LG LRFC25750TT User Guide - Page 13

LEVELING AND DOOR ALIGNMENT Leveling Your refrigerator has two front leveling screws--one on the right and one on the left. If your refrigerator seems unsteady or you want the doors to close easier, adjust the refrigerator's tilt using the instructions below: 1. Plug the refrigerator's power cord into a 3-prong grounded outlet. Move the refrigerator into its final position. 2. Turn the leveling screw clockwise to raise that side of the refrigerator or counterclockwise to lower it. It may take several turns of the leveling screw to adjust the tilt of the refrigerator. NOTE: Having someone push against the top of the refrigerator takes some weight off the leveling screws. This makes it easier to adjust the screws. Door Alignment If the space between your doors is uneven, follow the instructions below to align the doors: 1. Lift up the door at hinge side with one hand where you want to raise up. 2. Insert a snap ring with another hand by twisting using pliers. 3. Insert a snap ring until the doors aligned enough (3 snap rings provided with Owner's manual). 3. Open both doors again and check to make sure that they close easily. If not, tilt the refrigerator slightly more to the rear by turning both leveling screws clockwise. It may take several more turns, and you should turn both leveling screws the same amount. 4. Re-adjust if necessary. 5. Replace the base grille. NOTE: Your new refrigerator is uniquely designed with two fresh food doors. Either door can be opened or closed independently of one another. And doors not closed automatically so you have to push to get them to seal. 14