LG LRFCS2503S Owners Manual - Page 14
Removing/Assembling the, Handles
![]() |
View all LG LRFCS2503S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
14 INSTALLATION Removing/Assembling the Handles When moving the refrigerator through a narrow opening, removing the doors is preferred. The appearance of the handles may vary from what is shown. WARNING • When assembling or disassembling the refrigerator handles, grasp the handle firmly to avoid dropping it. • Do not swing the handle into nearby people or animals. • Make sure that the bracket hole of the handle fits properly into the stopper bolt of the door. Assemble the set screws to fix the handle into place. • Make sure that there is not a gap between the door and handle after assembling the handle. Tools Needed • 3/32 in. Allen wrench • 1/8 in. Allen wrench • 1/4 in. Allen wrench Removing the Refrigerator Handles 1 Loosen the set screws a with a 3/32 in. Allen wrench and remove the handle. 2 Loosen the mounting fasteners b that connect to the refrigerator door and handle using a ¼ in. Allen wrench, and remove the mounting fasteners. fasteners and tightening the set screws b with a 3/32 in. Allen wrench. Removing the Freezer Drawer Handle 1 Loosen the set screws a located on the lower side of the handle with a 1/8 in. Allen wrench and remove the handle. 2 Loosen the mounting fasteners b with a 1/4 in. Allen wrench, and remove the mounting fasteners. Assembling the Freezer Drawer Handle 1 Assemble the mounting fasteners a at both ends of the handle with a 1/4 in. Allen wrench. 2 Place the handle on the door by fitting the handle footprints over the mounting fasteners and tightening the set screws b with a 1/8 in. Allen wrench. Assembling the Refrigerator Handles 1 Assemble the mounting fasteners a at both ends of the handle with a 1/4 in. Allen wrench. 2 Place the handle on the door by fitting the handle footprints over the mounting
![](/manual_guide/products/lg-lrfcs25d3s-owners-manual-af4eb9a/14.png)