LG LRFD22850TT User Guide - Page 12

LG LRFD22850TT Manual

Get LG LRFD22850TT PDF manuals and user guides View all LG LRFD22850TT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

REFRIGERATOR INSTALLATION REMOVING AND REPLACING REFRIGERATOR DOORS (models with water dispenser) 1. Removing Refrigerator Door NOTE: Handle appearance may vary. IMPORTANT : Before you begin, turn the refrigerator OFF and unplug it. Remove food and any bins from doors. Left Door Loosen the screws and remove the cove on back side (see figure A). Disconnect water supply tube by pushing back on the disconnect ring (3). Loosen the cover screw (1). Disconnect door switch wire (2). Pull out the tube (4). CAUTION: If a tube end is deformed or worn out, cut the damaged portion away. Disconnect wire harness (5). Loosen screws (6) and lift off the top hinge (7). Place the door on a non-scratching surface with the inside up. CAUTION: When removing top hinge, be careful that the door does not fall forward. Right Door Loosen the cover screw (1). Disconnect door switch wire (2). Disconnect wire harness (4). Remove the ground screw (8). Loosen screws (6) and lift off the top hinge (7). Place the door on a non-scratching surface with the inside up.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
REFRIGERATOR INSTALLATION
REMOVING
AND REPLACING
REFRIGERATOR DOORS
(models
with water
dispenser)
1. Removing Refrigerator
Door
NOTE:
Handle
appearance
may
vary.
IMPORTANT:
Before
you
begin,
turn
the
refrigerator
OFF
and
unplug
it.
Remove
food
and
any
bins
from
doors.
Left Door
Disconnect
water supply
tube
by
pushing
back
on
the
disconnect
ring
(3).
Loosen
the
screws
and
remove
the
cove
on
back
side
(see
figure
A).
Loosen
the
cover screw (1).
Disconnect
door switch
wire
(2).
Pull out
the
tube
(4).
CAUTION:
If
a
tube
end
is
deformed
or worn
out,
cut
the
damaged
portion
away.
Disconnect
wire
harness
(5).
Loosen
screws
(6) and
lift
off
the
top
hinge
(7).
Place the
door on
a non-scratching
surface
with
the
inside
up.
CAUTION:
When
removing
top
hinge,
be
careful that
the
door
does
not
fall forward.
Right Door
Loosen
the
cover screw (1).
Disconnect
door switch
wire
(2).
Disconnect
wire
harness
(4).
Remove
the
ground
screw (8).
Loosen
screws
(6) and
lift
off
the
top
hinge
(7).
Place the
door on
a
non-scratching
surface
with
the
inside
up.