LG LRFDS3016S Owners Manual - Page 29
Ice and Water Dispenser
View all LG LRFDS3016S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Selecting Sabbath mode automatically turns off the Alarm functions. The dispenser or InstaView is disabled in Sabbath Mode. This information is only available on models with the dispenser or InstaView. OPERATION 29 Keep containers at an appropriate distance from the dispensers. Tall, narrow glasses should be held far enough from the ice outlet to prevent ice from jamming in the ice chute. A container with a very small opening should be held as close to the dispenser as possible to avoid spilling. ENGLISH Ice and Water Dispenser Before Using the Ice and Water Dispenser CAUTION Keep children away from the dispenser. Children may play with or damage the controls. Throw away the first bin full of ice (about 140160 cubes) after installation. The first ice and water dispensed may include particles or odor from the water supply line or the water tank. This is also necessary if the refrigerator has not been used for a long time. Dispense and throw away 2.5 gallons of water (flush for approximately 5 minutes) after installation. Do not dispense the entire 2.5 gallon amount continuously. Press and release the dispenser pad for cycles of 30 seconds ON and 60 seconds OFF. This is also necessary if the refrigerator has not been used for a long time. If ice or water dispenses unexpectedly, turn off the water supply and contact an LG Electronics Customer Information Center. Never use a glass that is exceptionally narrow or deep. Ice may jam in the ice passage and refrigerator performance may be affected. When dispensing ice from the dispenser, do not use a fragile container. Using the Ice and Water Dispenser 1 Press the button for the desired dispenser mode on the dispenser control panel. The LED lights up when the mode is selected. 2 Press the dispenser paddle a with a glass or other container to dispense cubed ice, water or crushed ice. Using the Measured Fill The Measured Fill function dispenses premeasured amounts of water automatically. 1 Select the desired amount from the Measured Fill buttons on the dispenser control panel. 2 Press the dispenser paddle with a container. NOTE The dispenser will not operate when either of the refrigerator doors is open. If discolored ice is dispensed, check the water filter and water supply. If the problem continues, contact an LG Electronics Customer Information Center. Do not use the water or ice until the problem is corrected. Dispense ice into a glass before filling it with water or other beverages. Splashing may occur if ice is dispensed into a glass that already contains liquid. Some dripping may occur after dispensing. Hold the cup beneath the dispenser for a few seconds after dispensing to catch all of the drops. 3 To stop the measured fill, release the dispenser paddle. Locking the Ice and Water Dispenser Press and hold the Lock button for three seconds to lock the dispenser and all the control panel functions. Follow the same instructions to unlock.