LG LRFS28XBS Owners Manual - Page 21

Assembling the Left Refrigerator

Get LG LRFS28XBS PDF manuals and user guides View all LG LRFS28XBS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

4 Set the hinge cover d in place. Insert and tighten the cover screw e. INSTALLATION 21 ENGLISH Assembling the Left Refrigerator Door CAUTION • Install the left refrigerator door after the right door is installed. 4 Push the water supply tube into the hole on the top case and pull it through the backplate. NOTE • The number of wire harnesses may vary depending on the model. 1 Make sure that the plastic sleeve is inserted in the bottom of the door. Install the refrigerator door onto the middle hinge. 5 Hold the water supply connection and gently push in the collet d to connect the water supply line as shown. Insert the tube at least 5/8 inch (15 mm) into the connector. Insert the clip on the joint to fasten the tube in place. • Connections may vary by model. † This feature is only available on some models. Type A† 2 Fit the hinge a over the hinge lever latch b and slot it into place. Rotate the lever c clockwise and fasten the hinge. Type B† 3 Connect all the wire harnesses and the ground screw.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
21
INSTALLATION
ENGLISH
4
Set the hinge cover
d
in place. Insert and
tighten the cover screw
e
.
Assembling the Left Refrigerator
Door
CAUTION
•
Install the left refrigerator door after the right
door is installed.
NOTE
•
The number of wire harnesses may vary
depending on the model.
1
Make sure that the plastic sleeve is inserted in
the bottom of the door. Install the refrigerator
door onto the middle hinge.
2
Fit the hinge
a
over the hinge lever latch
b
and slot it into place. Rotate the lever
c
clockwise and fasten the hinge.
3
Connect all the wire harnesses and the
ground screw.
4
Push the water supply tube into the hole on
the top case and pull it through the backplate.
5
Hold the water supply connection and gently
push in the collet
d
to connect the water
supply line as shown. Insert the tube at least
5/8 inch (15 mm) into the connector. Insert
the clip on the joint to fasten the tube in place.
•
Connections may vary by model.
†
This feature is only available on some
models.
Type A
†
Type B
†