LG LRFVC2406D Owners Manual - Page 34

Humidity Controlled, Crispers

Page 34 highlights

34 OPERATION NOTE • If you are leaving the refrigerator turned off for an extended period, remove all food and unplug the power cord. Clean the interior, and leave the door open to prevent fungi from growing in the refrigerator. • Do not store food with high moisture content towards the top of the refrigerator. The moisture could come into direct contact with the cold air and freeze. • Wash food before storing it in the refrigerator. Vegetables should be washed, and food packaging should be wiped down to prevent adjacent foods from being contaminated. • If the refrigerator is kept in a hot and humid place, frequent opening of the door or storing a lot of vegetables in the refrigerator may cause condensation to form. Wipe off the condensation with a clean cloth or a paper towel. • If doors are opened or closed too often, warm air may penetrate the refrigerator and raise its temperature. This can increase the running costs of the unit. Humidity Controlled Crispers Using the Humidity Controlled Crispers This feature is only available on some models. The crispers provide fresher tasting fruit and vegetables by letting you easily control humidity inside the drawer. You can control the amount of humidity in the moisture-sealed crispers by adjusting the control to any setting between Vegetables and Fruit. • Vegetables keeps moist air in the crisper for best storage of fresh, leafy vegetables. • Fruit lets moist air out of the crisper for best storage of fruit. Removing/Assembling the Humidity Controlled Crispers 1 Open the doors completely and remove the contents of the Door-in-Door case. Lift up and pull out the Door-in-Door case. NOTE • The Door-in-Door feature is only available on some models. 2 Pull out the crisper to full extension, lift the front up, and pull straight out. 3 To reassemble, slightly tilt up the front, insert the crisper into the frame and push it back into place. 4 Line up the tabs on the Door-in-Door case with the slots on the door and push down until it snaps into place. NOTE • The Door-in-Door feature is only available on some models.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

34
OPERATION
NOTE
´
If you are leaving the refrigerator turned off for
an extended period, remove all food and unplug
the power cord. Clean the interior, and leave the
door open to prevent fungi from growing in the
refrigerator.
´
Do not store food with high moisture content
towards the top of the refrigerator. The moisture
could come into direct contact with the cold air
and freeze.
´
Wash food before storing it in the refrigerator.
Vegetables should be washed, and food
packaging should be wiped down to prevent
adjacent foods from being contaminated.
´
If the refrigerator is kept in a hot and humid
place, frequent opening of the door or storing a
lot of vegetables in the refrigerator may cause
condensation to form. Wipe off the
condensation with a clean cloth or a paper towel.
´
If doors are opened or closed too often, warm
air may penetrate the refrigerator and raise its
temperature. This can increase the running costs
of the unit.
Humidity Controlled
Crispers
Using the Humidity Controlled
Crispers
This feature is only available on some models.
The crispers provide fresher tasting fruit and
vegetables by letting you easily control humidity
inside the drawer.
You can control the amount of humidity in the
moisture-sealed crispers by adjusting the control
to any setting between
Vegetables
and
Fruit
.
´
Vegetables
keeps moist air in the crisper for
best storage of fresh, leafy vegetables.
´
Fruit
lets moist air out of the crisper for best
storage of fruit.
Removing/Assembling the
Humidity Controlled Crispers
1
Open the doors completely and remove the
contents of the Door-in-Door case. Lift up and
pull out the Door-in-Door case.
NOTE
´
The Door-in-Door feature is only available on
some models.
2
Pull out the crisper to full extension, lift the
front up, and pull straight out.
3
To reassemble, slightly tilt up the front, insert
the crisper into the frame and push it back
into place.
4
Line up the tabs on the Door-in-Door case
with the slots on the door and push down
until it snaps into place.
NOTE
´
The Door-in-Door feature is only available on
some models.