LG LRFXC2406S Owners Manual - Page 21
Connecting the Water Line
![]() |
View all LG LRFXC2406S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
4 Push the water supply lines into the hole on the top case and pull it through the backplate. INSTALLATION 21 Assembling the Hinge Cover Position the hinge cover in its place. Insert and tighten the cover screws. ENGLISH 5 Hold the water supply connection and gently push in the collet d to connect the water supply line as shown. Insert the tube at least 5/8 inch (15 mm) into the connector. Insert the clip on the joint to fasten the tube in place. NOTE • Disassembling/Assembling the Water Lines Connecting the Water Line Before Beginning This water line installation is not covered by the refrigerator warranty. Follow these instructions carefully to minimize the risk of expensive water damage. If necessary, call a qualified plumber to correct water hammer before installing the water supply line to the refrigerator. Water banging in the pipes, or water hammer in residential plumbing can cause damage to refrigerator parts and lead to water leakage or flooding. • Turn the icemaker OFF if the refrigerator will be used before the water line is connected. • Do not install the icemaker tubing in areas where the ambient temperatures fall below freezing. WARNING • Connect to potable water supply only. e Collet f Tube g Insert line h Clip • Gently press the collet and insert the tube until only one line shows on the tube. CAUTION • To prevent burns and product damage, only connect the refrigerator water line to a cold water supply. • Wear eye protection during installation to prevent injury.
![](/manual_guide/products/lg-lrfxc2406d-owners-manual-7c9ad0b/21.png)