LG LROFC1104V Owners Manual - Page 8

8 INSTALLATION INSTALLATION Before Installing Installation Overview Please read the following installation instructions first after purchasing this product or transporting it to another location. label, or the Tech Sheet that is located under the front of the appliance. • To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry. • Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your appliance. • Reinstall or adjust shelves as needed. Freezer shelves are installed in the shipping position. Reinstall shelves according to your individual storage needs. a Unpacking the Freezer b Choosing the Proper Location c Reversing Doors and Leveling Unpacking the Freezer WARNING • Use two or more people to move and install the appliance. Failure to do so can result in back injury or other injury. • The appliance is heavy. Protect the floor when moving the appliance for cleaning or service. Always pull the appliance straight out when moving it. Do not wiggle or walk the appliance when trying to move it, as floor damage could occur. • Keep flammable materials and vapors, such as gasoline, away from the appliance. Failure to do so can result in fire, explosion, or death. NOTE • Remove tape and any temporary labels from your appliance before using. Do not remove any warning labels, the model and serial number Choosing the Proper Location Electricity Use an individual, grounded outlet:115 Volts, 60 Hz, AC, 15 amps minimum. WARNING • Do not overload house wiring and cause a fire hazard by plugging in multiple appliances in the same outlet with the appliance. • To reduce the risk of electric shock, do not install the appliance in a wet or damp area. Flooring To avoid noise and vibration, the unit must be installed and leveled on a solidly constructed floor. If required, adjust the leveling legs to compensate for the unevenness of the floor. NOTE • Installing on carpeting, soft tile surfaces, a platform or weakly supported structure is not recommended.