LG LRSC21935SW User Guide - Page 23
How to dismantle parts
View all LG LRSC21935SW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
How to dismantle parts Freezer compartment lamp Separatethe lamp by pulling it out (®)while slightlystriking((1))and rotating ((9)the lamp cover, Turn the bulb counterclockwise,Max. 40 W bulb for refrigerator is used and can be purchased at a service center. Dispenser lamp Seperate the lamp by pulling it out, and then remove the lamp. Max. 15 W bulb for refrigerator is used and can be purchased at a service center. Freezer compartment shelf To remove a shelf, lift the left part of the shelf a bit, push it to the direction (O), lift the right part to the diretion (®), and take it out. Door rack and support Lift the door rack holding both sides ((b) and pull it out to (®) direction. Ice storage bin Hold the ice storage bin as shown in the right figure and pull it out (®) while slightly lifting it (®). • It is recommended not to dismantle the ice storage bin unless it is necessary. • Be sure to use both hands when removing the ice storage bin, so as not to drop it on the floor. • If the ice storage bin does not fit well, slightly rotate the rotating device. After dispenser is used The water collector has no self-drainage function. So it should be cleaned regularly. Remove the cover by pressing the left side of water collector cover and dry it with a cloth. Press the point marked as shown in the figure to the right to remove the water collector cover. © Rotating device