LG LRSC26923TT Owner's Manual - Page 21
How to Dismantle Parts - service
View all LG LRSC26923TT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
How to Dismantle Parts Care and Maintenance Care and Maintenance Freezer Compartment Lamp NOTE • Dismantling is done in the reverse sequence of assembly. Be sure to unplug the power plug before dismantling and assembly. Never apply severe force to dismantle parts. Parts may be damaged. Separate the lamp by pulling it out ➂ while slightly striking ➀ and rotating ➁ the lamp cover. Turn the bulb counterclockwise. Max. 40 W bulb for refrigerator is used and can be purchased at a service center. 1 2 3 Dispenser Lamp Seperate the lamp by pulling it out, and then remove the lamp. Max. 15 W bulb for refrigerator is used and can be purchased at a service center. Freezer Compartment Shelf To remove a shelf, lift the left part of the shelf a bit, push it to the direction , lift the right part to the direction , and take it out. EXPRESS/JET FRZ DISPENSER FREEZER REFRIGERATER FILTER/LIGHT LOCK 1 2 Door Rack and Lift the door rack holding both sides and Support pull it out to direction. Ice Storage Bin Lift the ice shelf as shown in the right figure and pull it out . Hold the ice storage bin as shown in the right figure and pull it out ➃ while slightly lifting it ➂. After Dispenser Is Used To assemble the ice storage bin, push it 6 while slightly lifting it 5 . It is recommended not to dismantle the ice storage bin unless it is necessary. Use both hands to remove the ice bin to avoid dropping it. If the ice bin does not slide into place easily, twist the drive device slightly. The water collector has no self-draining function. It should be cleaned regularly. Remove the cover by pulling the front side of water collector cover and dry it with a cloth. 2 1 4 3 21