LG LSC27910TT Owner's Manual (English) - Page 19

CARE AND CLEANING 6. Take out all removable parts, wrap them well and tape together so they don't shift and rattle during the move. Refer to sections in Using your Refrigerator for removal instructions. 7. Depending on the model, raise the front of the refrigerator so it rolls more easily OR screw in the leveling legs all the way so they don't scrape the floor. See the DOOR ALIGNMENT section. 8. Tape the doors shut and tape the power cord to the refrigerator cabinet. When you get to your new home, put everything back and refer to the REFRIGERATION INSTALLATION section for setup instructions. The icemaker will fill with water when it cools to freezing. A newly-installed refrigerator may take 12 to 24 hours to begin making ice cubes. Throw away the first few batches of ice to allow the water line to clear. Be sure nothing interferes with the sweep of the feeler arm. When the bin fills to the level of the feeler arm, the icemaker will stop producing ice. It is normal for several cubes to be stuck together . If ice is not used frequently, old ice cubes will become cloudy, taste stale, and shrink. WARNING Personal Injury Hazard Avoid contact with the moving parts of the ejector mechanism, or with the heating element that releases the cubes. DO NOTplace fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in. OPERATION INSTRUCTIONS A newly-installed refrigerator may take 12 to 24 hours to begin making ice. Indicator Light NOTE: If the cube size is smaller or larger than you expected, you can regulate the size with the cube size button. Every time you press the cube size button, the indicator moves up one light. The higher the light position the larger cubes will be. Pressing at highest position returns Indicator to lowest position. WHEN YOU SHOULD SET THE ICEMAKER POWER SWITCH TO O (OFF) When the water supply will be shut off for several hours. When the ice storage bin is removed for more than a minute or two. When the refrigerator will not be used for several days. NORMAL SOUNDS YOU MAY HEAR Feeler Arm Water Amount Selection Button Power Switch The icemaker will produce 8 cubes per cycle, approximately 120-150 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other operating conditions. If the refrigerator is used before the water connection is made to the icemaker, set the power switch to O (Off). When the refrigerator has been connected to the water supply, set the power switch to I (On). The icemaker water valve will buzz as the icemaker fills with water. If the power switch is in the I (On) position, it will buzz even if it has not yet been hooked up to water. To stop the buzzing, move the power switch to O (Off) position. NOTE: Keeping the power switch in the I (On) position before the water line is connected can damage the icemaker. You will hear the sound of cubes dropping into the bin and water running in the pipes as the icemaker refills. 19