LG LSDE388VS Owner's Manual - Page 34
Cycle Setting Buttons, Special Functions
View all LG LSDE388VS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
CYCLE SETTING BUTTONS (cont.) To Install the Drying Rack 1 With the dryer door open, slide the rack into the dryer drum. 2 Make sure it is seated evenly on the edge of the inner door rim and resting flat on the inside of the dryer. NOTE: Be sure to remove the drying rack after using the RACK DRY cycle. SPECIAL FUNCTIONS The option buttons also activate special functions, including CHILD LOCK, DRUM LIGHT, ENERGY UASGE DISPLAY and LANGUAGE. Press and hold the option button marked with the special function for 3 seconds to activate. * DRUM LIGHT Use DRUM LIGHT with item you can see the drum inside by choosing drum light function. It helps easy viewing the drying cycle. Press and hold the EASY IRON button for 3 seconds to activate or deactivate the DRUM LIGHT function. * CHILD LOCK Use this option to prevent unwanted use of the dryer or to keep cycle settings from being changed while the dryer is operating. Press and hold the RACK DRY button for 3 seconds to activate or deactivate the CHILD LOCK function. The child lock indicator will be shown in the display, and all buttons are disabled except the ON/OFF button. NOTE: CHILD LOCK lasts after the end of cycle. If you want to deactivate this function, press and hold the RACK DRY button for 3 seconds. * ENERGY USAGE DISPLAY This option provides the electric energy and operating cost for the cycle you selected on the LCD display. The electric charge is converted at Energy Star's rate. This is a default option. To turn off this option, press and hold the WRINKLE CARE button for 3 seconds. (Estimated operating cost based on a 2007 national average electricity cost of 10.65 cents per kWh and natural gas cost of $1.218 per therm.) NOTE: Your cost will depend on your utility rates and use. And the electric energy and operating cost display the default of a cycle. * LANGUAGE You may change the language shown in the display from English to French or Spanish. Press and hold the DAMP DRY BEEP button for 3 seconds until the display changes. Then select the desired language by pressing the DAMP DRY BEEP button. Once set, the selected language will remain in memory, even if the Dryer is turned off or unplugged. 34