LG LSDG389VS Owner's Manual - Page 41

English

Page 41 highlights

BEFORE CALLING FOR SERVICE (cont.) ENGLISH Problem Possible Causes Steam doesn't generate but no error code is shown. Garments still wrinkled after SteamFresh™. There are no creases left on garment after SteamFresh™. Garments have static after REDUCE STATIC. • Water level error. • Too many or too different types of garments in dryer. • The function of this cycle is to remove wrinkles from fabric. • This is normal. Garments are too • Correct drying options not damp or too dry after selected. REDUCE STATIC. Garments are not uniformly damp after EASY IRON. • This is normal. Water drips from door • This is normal. during Steam Cycle. Steam is not visible • This is normal. during Steam Cycle. Drum does not turn • This is normal. during Steam Cycle. Cannot see steam vapor at the beginning of cycle. • This is normal. The display shows BULKY LOAD. Odors remain in clothing after STEAMFRESH™. CHECK FILTER light is on during the drying cycle 2 bars are displayed In the LCD screen. END OF CYCLE • MORE TIME button pressed. • STEAMFRESH™ did not remove odor completely. • Lint filter is almost clogged or full. • Ductwork is slightly too long or has too many turns/restrictions. • Partial blockage of the ductwork due to lint buildup. 4 bars areFINdDisELpClIaCyLOed In the LCD screen. NEED FLOW CHECK FIN THE DUCTWORK HAS A BLOCKAGE THAT NEEDS TO BE REMOVED DE CYCLE IMMEDIATELY. • Ductwork is too long or has too many turns/restrictions. • Significant blockage of the ductwork due to lint buildup or debris. Solutions • Unplug dryer and call for service. • Small loads of 1 to 5 items work best. • Load fewer garments. Load similar-type garments. • Use an iron to make creases. • Depends on individual moisture level in skin. • Select load weight manually before starting REDUCE STATIC option. • Depends on the amount or type of garments. • This is steam condensation on door surface. • Steam vapor is difficult to see when the door is closed. • The drum is turned off so that the steam vapor remains in the drum. • Steam is released at different stages of the cycle for each option. • Pressing the MORE TIME button several times will set the cycle for a large load such as a comforter. • Fabrics containing strong odors should be washed in a normal cycle. • Pause the drying cycle and clean the lint filter. • Install a shorter or straighter duct run. See the Installation Instructions. • Ductwork should be checked/cleaned soon. Dryer can be used in this condition, but drying times may be longer. • If "END OF CYCLE" is displayed after the end of cycle, it will be off in 4 minutes. If POWER button is pressed or the door is opened, power will be off immediately. • Install a shorter or straighter duct run. See the Installation Instructions. • Ductwork should be checked/cleaned soon. Dryer can be used in this condition, but drying times may be longer. • If "NEED FLOW CHECK" is displayed after the end of cycle, it will be off in 2 hours. If POWER button is pressed or the door is opened, power will be off immediately. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148

ENGLISH
BEFORE CALLING FOR SERVICE
(cont.)
Problem
Possible Causes
Solutions
Steam±doesn’t±
generate but no error
code is shown.
• Water level error.
• Unplug dryer and call for service.
Garments still
wrinkled after
STEAMFRESH
.
• Too many or too different
types of garments in dryer.
• Small loads of 1 to 5 items work best.
• Load fewer garments. Load similar-type garments.
There are no creases
left on garment after
STEAMFRESH
.
• The function of this cycle
is to remove wrinkles from
fabric.
• Use an iron to make creases.
Garments have
static after REDUCE
STATIC.
• This is normal.
• Depends on individual moisture level in skin.
Garments are too
damp or too dry after
REDUCE±STATIC.
• Correct drying options not
selected.
• Select load weight manually before starting
REDUCE STATIC option.
Garments are not
uniformly damp after
EASY±IRON.
• This is normal.
• Depends on the amount or type of garments.
Water drips from door
during±Steam±Cycle.
• This is normal.
• This is steam condensation on door surface.
Steam±is±not±visible±
during±Steam±Cycle.
• This is normal.
• Steam vapor is difficult to see when the door is
closed.
Drum does not turn
during±Steam±Cycle.
• This is normal.
The drum is turned off so that the steam vapor
remains in the drum.
Cannot see steam
vapor at the
beginning of cycle.
• This is normal.
Steam is released at different stages of the cycle
for each option.
• MORE TIME button pressed.
Odors remain in
clothing after
STEAMFRESH
.
• STEAMFRESH
did not
remove odor completely.
• Fabrics containing strong odors should be
washed in a normal cycle.
The display shows
BULKY LOAD.
Pressing the MORE TIME button several times will
set the cycle for a large load such as a comforter.
2 bars are displayed
In the LCD screen.
• Ductwork is slightly too
long or has too many
turns/restrictions.
• Partial blockage of the
ductwork due to lint buildup.
Install a shorter or straighter duct run. See the
Installation Instructions.
Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying
times
may be longer.
• If “END OF CYCLE” is displayed after the end of
cycle, it will be off in 4 minutes. If POWER button
is pressed or the door is opened, power will be off
immediately.
4 bars are displayed
In the LCD screen.
• Ductwork is too long or has
too many turns/restrictions.
• Significant blockage of the
ductwork due to lint buildup
or debris.
Install a shorter or straighter duct run. See the
Installation Instructions.
Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times
may be longer.
• If “NEED FLOW CHECK” is displayed after the end
of cycle, it will be off in 2 hours. If POWER button
is pressed or the door is opened, power will be off
immediately.
END OF CYCLE
THE DUCTWORK HAS
A BLOCKAGE THAT NEEDS
TO BE REMOVED
IMMEDIATELY.
NEED FLOW CHECK
CHECK FILTER light
is on during the
drying cycle
• Lint filter is almost clogged
or full.
• Pause the drying cycle and clean the lint filter.
41