LG LSMX211ST Owners Manual - Page 27
Setting The Functions
View all LG LSMX211ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
HOW TO USE 27 ENGLISH Setting The Functions Setting The Metered Fill Unit You can change the unit of Metered fill. As you can see the left, the initial unit after power on is OZ. The unit is changed to CUPS when you press and hold this button at least 3 seconds and when you press it again, changed to OZ. While water is dispensed, the numbers will be increase. Setting The Dispenser You can select the ice type of the dispenser. The default setting is CRUSHED ice. Press CUBE to get cubes instead of crushed ice. Setting The Light You can control the lamp in the dispenser. The lamp is off when the power on. When you press the LIGHT button, the lamp turns on, the icon also on. When you press it again, the lamp turns off, and the icon also turns off. Setting The Filter Reset You need to reset filter remaining period after replacing filter. Press and hold the FILTER RESET button more than 3 seconds to reset the filter indicator after the water filter has been replaced. The figure is changed 6 0 after pressing it more than 3 seconds. Activating Ice Plus Press the ICE PLUS button to activate the ICE PLUS function. The ICE PLUS function runs the freezer compartment at the coldest setting for 24-hour to increase ice making and then turns off automatically. To deactivate this function, press it again. Activating Energy Saving Press the ENERGY SAVING button for at least 3 seconds to activate or deactivate the function. This function is recommended for added energy savings. (Some heaters to reduce excess moisture on the refrigerator may be turned off) The energy saving function is also recommended during long periods of time spent away from home-like vacation. Setting The Door Alarm The ALARM button also controls the door alarm that sounds three times in 30-second intervals when a compartment door is left open for more than 60 seconds. The alarm stops sounding when the door is closed. Press the ALARM button once to activate and deactivate the door alarm function. NOTE: Contact authorized service center if the alarm continues to sound after the doors are closed. Setting The Dispenser Lock Press and hold the LOCK button for three seconds to lock the dispenser and all of the other control panel functions. Press and hold again for 3 seconds to unlock. NOTE: It is recommended that the filter be replaced when the indicator light on the front dispenser reaches 0.