LG LSXS26336V Owners Manual - Page 37

Caution, Warning

Page 37 highlights

MAINTENANCE 37 ENGLISH Application Guidelines/ Water Supply Parameters Service Flow 0.5 gpm (1.9 lpm) Water Supply Water Pressure Water Temperature - Potable Water 20 -120 psi (138 - 827 kPa) 33°F - 100°F (0.6°C - 38°C) It is essential that the manufacturer's recommended installation, maintenance and lter replacement requirements be carried out for the product to perform as advertised. NOTE While the testing was performed under standard laboratory conditions, actual performance may vary. Replacement Cartridge: ADQ73613401 For estimated costs of replacement elements please call 01 8000 910 683 (24 hours per day/7 days per week) or visit our website at www.lge.com WARNING To reduce the risk associated with choking: Do not allow children under 3 years of age to have access to small parts during the installation of this product. To reduce the risk associated with the ingestion of contaminants: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certi ed for cyst reduction may be used on disinfected water that may contain lterable cysts. EPA Establishment # 070595MEX-001 CAUTION To reduce the risk associated with property damage due to water leakage: Read and follow Use Instructions before installation and use of this system. Installation and use MUST comply with all state and local plumbing codes. Do not install if water pressure exceeds 120 psi (827 kPa). If your water pressure exceeds 80 psi (552 kPa), you must install a pressure limiting valve. Contact a plumbing professional if you are uncertain how to check your water pressure. Do not install where water hammer conditions may occur. If water hammer conditions exist you must install a water hammer arrester. Contact a plumbing professional if you are uncertain how to check for this condition. Do not install on hot water supply lines. The maximum operating water temperature of this lter system is 100°F (37.8°C). Protect lter from freezing. Drain lter when temperatures drop below 40°F (4.4°C). The disposable lter cartridge MUST be replaced every 6 months, at the rated capacity or if a noticeable reduction in ow rate occurs. Protect from freezing, remove lter cartridge when temperatures are expected to drop below 33° F (0.6 ºC). Do not install systems in areas where ambient temperatures may go above 110° F (43.3° C). Where a back ow prevention device is installed on a water system, a device for controlling pressure due to thermal expansion must be installed. Ensure all tubing and ttings are secure and free of leaks. Manufactured for LG Electronics by MCM Co., Ltd. 45-10, Nowon-Ri, Yiwol-Myun, Jinchun-Kun, Chung-Buk, Korea.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55

37
MAINTENANCE
ENGLISH
CAUTION
To reduce the risk associated with property
damage due to water leakage:
Read and follow Use Instructions before
installation and use of this system.
Installation and use MUST comply with
all
state and local plumbing codes.
Do not install if water pressure exceeds
120 psi (827 kPa). If your water pressure
exceeds 80 psi (552 kPa), you must install
a pressure limiting valve. Contact a plumb-
ing professional if you are uncertain how to
check your water pressure.
Do not install where water hammer
conditions may occur. If water hammer
conditions exist you must install a water
hammer arrester. Contact a plumbing
professional if you are uncertain how to
check for this condition.
Do not install on hot water supply lines.
The maximum operating water tem-
perature of this filter system is 100°F
(37
.8°C).
Protect filter from freezing. Drain filter
when temperatures drop below 40°F
(4.4°C).
The disposable filter cartridge MUST be
replaced every 6 months, at the rated
capacity or if a noticeable reduction in
flow rate occurs.
Protect from freezing, remove filter
car-
tridge when temperatures are expected
to drop below 33° F (0.6 ºC).
Do not install systems in areas where
ambient temperatures may go above
110° F (43.3° C). Where a backflow
prevention device is installed on a water
system, a device for controlling pres-
sure due to thermal expansion must be
installed.
Ensure all tubing and fittings are secure
and
free of leaks.
NOTE
While the testing was performed under
standard laboratory conditions, actual
performance may vary.
WARNING
To reduce the risk associated with chok-
ing:
Do not allow children under 3 years of
age to have access to small parts dur-
ing the installation of this product.
To reduce the risk associated with the
ingestion of contaminants:
Do not use with water that is
microbi-
ologically unsafe or of unknown quality
without adequate disinfection before or
after the system. Systems certified for
cyst reduction may be used on disin-
fected water that may contain filterable
cysts. EPA Establishment # 070595-
MEX-001
Replacement Cartridge: ADQ73613401
It is essential that the manufacturer’s recom-
mended installation, maintenance and filter
replacement requirements be carried out for the
product to perform as advertised.
Service Flow
Water Supply
Water Pressure
Water Temperature
0.5 gpm
(1.9 lpm)
- Potable Water
20 -120 psi (138 - 827 kPa)
33°F - 100°F (0.6°C - 38°C)
Application Guidelines/
Water Supply Parameters
Manufactured for LG Electronics by MCM Co.,
Ltd. 45-10, Nowon-Ri, Yiwol-Myun, Jinchun-Kun,
Chung-Buk, Korea.
For estimated costs of replacement elements
please call 01 8000 910 683 (24 hours per
day/7 days per week) or visit our website at
www.lge.com