LG LSXS26366D Owners Manual - Page 13

Removing/Assembling the, Refrigerator Doors

Page 13 highlights

ENGLISH Removing/Assembling the Refrigerator Doors When it is necessary to move the refrigerator through a narrow opening, removing the doors is the recommended procedure. WARNING Electric Shock Hazard Disconnect electrical supply to refrigerator before installing. Failure to do so could result in death or serious injury. Before removing freezer door, disconnect water line connectors (one white tube, one blue tube). NOTE: Do not remove freezer door if either the white or blue tube is still connected. To remove connectors use the support block that is in the freezer bin. 1 Support Block 2 120 mm 3 If your entrance door is too narrow for the refrigerator to pass through, remove the refrigerator doors and move the refrigerator sideways through the doorway. Use two or more people to remove and install the refrigerator doors. Failure to do so can result in back or other injury. Disconnect the electrical supply to the refrigerator before installation. Failure to do so could result in serious injury or death. Do not put hands, feet or other objects into the air vents or bottom of the refrigerator. You may be injured or receive an electrical shock. Be careful when handling the hinge and stopper. You may be injured. Remove food and bins before detaching the doors and drawers. INSTALLATION 13 Removing the Left (Freezer) Door with Water Line Connection 1. Loosen the hinge cover screws and remove the hinge cover. Disconnect all wire harnesses. hinge cover upper hinge wire harness 2. Rotate the hinge lever counterclockwise ( ) and lift the upper hinge ( ). hinge lever upper hinge CAUTION When removing the upper hinge, be careful that the door does not fall forward. 3. Remove the freezer compartment door by lifting it upward. This time, the door should be lifted enough for the water feed tube to be completely pulled out. Enough for the water feed tube to be completely pulled out CAUTION Place the door, inside facing up, on a non-scratching surface. Be careful not to damage the water feed tube. Removing the Right (Refrigerator) Door 1. Open the door. Remove the top hinge cover screw. 2. Use a at blade screwdriver to pry back the hooks (not shown) of the hinge cover from the top of the refrigerator cabinet. Lif t up the cover. Disconnect all wire harnesses. wire harness

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55

13
INSTALLATION
ENGLISH
Removing/Assembling the
Refrigerator Doors
When it is necessary to move the refrigerator
through a narrow opening, removing the doors
is the recommended procedure.
Removing the Left (Freezer) Door
with Water Line Connection
wire
harness
hinge
cover
upper
hinge
WARNING
If your entrance door is too narrow
for the refrigerator to pass through,
remove the refrigerator doors and move
the refrigerator sideways through the
doorway.
Use two or more people to remove and
install the refrigerator doors. Failure to do
so can result in back or other injury.
Disconnect the electrical supply to the
refrigerator before installation. Failure
to do so could result in serious injury or
death.
Do not put hands, feet or other objects
into the air vents or bottom of the
refrigerator. You may be injured or receive
an electrical shock.
Be careful when handling the hinge and
stopper. You may be injured.
Remove food and bins before detaching
the doors and drawers.
hinge lever
upper hinge
CAUTION
Enough for
the water feed tube
to be completely
pulled out
120 mm
Suppo
r
t Block
2
1
3
1. Loosen the hinge cover screws and remove
the hinge cover. Disconnect all wire harnesses.
3. Remove the freezer compartment door by
lifting it upward. This time, the door should be
lifted enough for the water feed tube to be
completely pulled out.
When removing the upper hinge, be careful
that the door does not fall forward.
CAUTION
Before removing freezer door, disconnect
water line connectors (one white tube, one
blue tube).
Electric Shock Hazard
Removing the Right (Refrigerator) Door
1. Open the door. Remove the top hinge cover
screw.
NOTE: Do not remove freezer
door if either
the white or blue tube is still connected. To
remove connectors use the support block
that is in the freezer bin.
2
. Use a
at blade screwdriver to pry back the
hooks (not shown) of the hinge cover from
the top of the refrigerator cabinet.
Lift up
the cover. Disconnect all wire harnesses.
Disconnect electrical supply to refrigerator
before installing.
Failure to do so could
result in death or serious injury.
2. Rotate the hinge lever counterclockwise (
)
and lift the upper hinge (
).
Place
the
door,
inside
facing
up,
on
a
non-scratching surface. Be careful not to
damage the water feed tube.
wire
harness