LG LSXS26396S Owners Manual - Page 12
Unpacking the Refrigerator, Choosing the Proper Location, Water, Electricity, Flooring
View all LG LSXS26396S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12 INSTALLATION Unpacking the Refrigerator WARNING • Use two or more people to move and install the refrigerator. Failure to do so can result in back injury or other injury. • The refrigerator is heavy moving the refrigerator for cleaning or service. Always pull the refrigerator straight out when moving it. Do not wiggle or walk the refrigerator occur. • gasoline, away from the refrigerator. Failure to NOTE • Remove tape and any temporary labels from your refrigerator before using. Do not remove any warning labels, the model and serial number label, or the Tech Sheet that is located under the front of the refrigerator. • To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your . • Do not use sharp instruments, rubbing alcohol, tape or glue. These products can damage the surface of your refrigerator. • Reinstall or adjust shelves as needed. Refrigerator shelves are installed in the shipping position. Reinstall shelves according to your individual storage needs. Choosing the Proper Location Water Water supply must be easily connected for the automatic icemaker. NOTE • The water pressure must be 20 - 120 psi or 138 - 827 kPa or 1.4 - 8.4 kgf/cm2. If the refrigerator is installed in an area with low water pressure (below 20 psi or 138 kPa or 1.4 kgf/cm2), you can install a booster pump to compensate for the low pressure. Electricity Use an individual, grounded outlet:115 Volts, 60 Hz, AC, 15 Amps minimum. WARNING • Don't use existing holes unless they are in the target area. Otherwise, the water supply and drain hose may be damaged by being crushed or kinked. Flooring To avoid noise and vibration, the unit must be required, adjust the leveling legs to compensate for NOTE • Installing on carpeting, soft tile surfaces, a platform or weakly supported structure is not recommended. Ambient Temperature Install this appliance in an area where the temperature is between 55 °F (13 °C) and 110 °F (43 °C). If the temperature around the appliance is too low or high, cooling ability may be adversely affected.