LG LT081CER Owner's Manual - Page 19
Remote control
View all LG LT081CER manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ENGLISH Operating Instructions Remote control The remote control and control panel will look like one of the following pictures. POWER • To turn the air conditioner ON, push this button. To turn the air conditioner OFF, push the button again. • This button takes priority over any other button. • When you first turn it on, the unit is in cool mode, High fan speed, Temperature setting at 72°F. • Auto Restart In the event at a power failure, the unit will run at the previous setting once power returns. TEMPERATURE SETTING • Use this button to automatically control the temperature of the room. The temperature can be set within a range of 60°F to 86°F by increments of 1°F. • The setting appears in the display. FAN SPEED • Every time you push this button it advances the setting as follows: (High ¡ Low ¡ Med ¡ High) Power Temp Fan Speed Timer Mode TIMER - SHUT-OFF TIME • You will usually use shut-off time while you sleep. • If unit is running, use Timer to set number of hours until shut-off. • For your sleeping comfort, once Time is set, the Temperature setting will raise 2°F after 30 min, and once again after another 30 min. • Push Timer button to advance setting from 1Hour ¡ 2Hours ¡ ... ¡ 12Hours maximum. - START TIME • If unit is off, use Timer to set of hours before unit starts. • Push Timer button to advance setting from 1Hour ¡ 2Hours ¡ ... ¡ 12Hours maximum. MODE - Push this button to shift mode of operation from COOL ¡ ENERGY SAVER ¡ FAN. - COOL: • Fan runs continually for normal cooling operation. - ENERGY SAVER: • The fan stops when the compressor stops cooling. Approximately every 3 minutes the fan will turn on and the unit will check the room air temperature to determine if cooling is needed. - FAN: • Fan-only operation. Owner's Manual 19