LG LT1030H Owners Manual - Page 16

installation PROCEDURE C _ edir.ed the louvers at the back of the waB sl_'ve to 60 ° angle as; shown in the FiG 17_ The use o! pliers is r_,mmendedo Rear Louvers (Top View), gO o D Remove the backing from the Horizontal Insulation strip. !3,,8" x 13i/8i X 273/16 and attach • at to, the _ns;i_ bottom of the sleeve, as shown belo.w. Remo_ the backing from '[he Around Insulation strip 13/8 x 13,/;, x 611/2 and attach that to the inside front of the sleeve as shown below FIG, 17 lt the wdl sleeve dready has a rear grille, skip to _ep 4, [Ifthe waB sleeve does not have a rear grille or Iouvered panel, ins_l! the plastic g_Ble from the k_ Cut: the [plastic grille to 26 ° lZ2" wide and 15o!/2" N,gh. P_ce the plastic grille to the inside of the waB sl.eeve at _e rear |lange_ FIG_ If the depth of your exist:in9 sle,_e is le,_ than or equal to t8 '_ skip to st_ 7. ,Othe_ise, cut the barf,s and the sup_rt bk_ks ac_rdin 9 'to Length "A" in the table below. Dep_'D" of the ,exis_ng Place the plastic grille FIG, 18 _ asten the 4 washer screws to s_ure the .9rBle to the wall ,sleeve. If you ne_ plastic nuts to mount plastic griBe to the inside of the wall sl_ve, there are plastic nuts in the instNlation kit The nuts are instNl_ from the inside d the sleeve and arre p_essed into the square h,o[_ of the rear flange. 18