LG LWHD1006R Owners Manual - Page 12
LG LWHD1006R Manual
View all LG LWHD1006R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installation To prevent vibration and noise, make sure the unit Fence is installed securely Install the unit whereand the firmly sunlight does not shine directly on the unit. The outside of the cabinet must extend outward for at least 12" and there should be no obstacles, such as a fence or wall, within 20" from the back of the cabinet because it will prevent heat radiation of the Restriction of outside air will greatly reduce the condenser, cooling efficiency of the air conditioner. I _g Cooled air i__t _ _ _ _ _h _=_ radiation __j_ _ Heat \ \ _[ ,, _o L o/ 1. Abbot lj2 \ / Over 20" _& structure. AUTION: All side louvers of the cabinet must remain exposed to the outside of the Install the unit a little slanted so the back is slightly lower than the front (about 1/2"). This will force condensed water to flow to the outside. Install the unit with the bottom about 30"~60" above the floor level. : All supporting parts should be secured to firm wood, masonry, or metal. • This unit is designed for installation in standard double hung windows with actual opening widths from 23" to 36". • The top and bottom window sash must open sufficiently to allow a clear vertical opening of 15" from the bottom of the upper sash to the window stool. Y _Sash / _23" 15" min. to 36"_ Inner sill _Window I i °__ • .-" q si, '" _Offset Exterior Interior wall "- l-'" / 20 1/12" min. -/ (Without frame curtain) / 12 Room Air Conditioner °