LG LWHD8000R User Manual - Page 15
Unit Installation - air conditioner manual
View all LG LWHD8000R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ENGLISH Installation Unit Installation Caution: During the following step, hold unit firmly until window sash is lowered to top channel behind side panel frames. Personal injury or property damage may result if unit falls from window. 1. Install the air conditioner in the window 1-1. Carefully lift the air conditioner and slide it into the open window. Make sure the bottom guide of the air conditioner drops into the notches of the L bracket. Tip! : When the air conditioner drops into the L bracket, the air conditioner will be centered in window opening. C ool E nergy S aver F F1 LOW F2 ME D F3 HIGH Fan Dry T imer TE MP C enter Line 1-2. While steadying the air conditioner, carefully bring the window sash down behind the upper guide of the air conditioner. When the air conditioner is properly installed, it should tilt slightly down at the back. If it is set correctly in the window, it will hang lower in the back automatically. If it does not, there is a problem with the installation. 2. Secure the guide panels Extend the guide panels (Type G) to fill the window opening using 4 screws (Type B) to secure them. 3. Install the sash seal and sash lock 3-1. Cut the sash seal (Type F) to the window width. Stuff the sash seal between the glass and the window to prevent air and insects from getting into the room. 3-2. Fasten the L bracket using a screw (Type A). 3-3. Remove the screws that secure the cabinet and base pan in the right side. Window Frame Upper Guide Bottom Guide Seal About 1/4" L Bracket L Bracket Type A Type B Sash Seal (Type F) Owner's Manual 15