LG M2362D-PM Owner's Manual - Page 18
When connecting with a DVI cable, DVI-D IN, AUDIO, IN RGB/DVI
View all LG M2362D-PM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
EXTERNAL EQUIPMENT SETUP When connecting with a DVI cable 1 Connect the DVI output of the PC to the DVI-D IN jack on the set. 2 Connect the audio cable from the PC to the AUDIO IN (RGB/DVI) sockets of the set. DVI-D IN (PC) AUDIO IN (RGB/DVI) 2 1 DVI OUTPUT AUDIO ! NOTE G Connect the signal input cabel and tighten it up by turning in the direction of the arrow as shown in the figure. G If the set is cold, there may be a small "flicker" when the set is switched on. This is normal, there is nothing wrong with the set. G If possible, use the 1920 x 1080 @ 60 Hz video mode to obtain the best image quality for your LCD monitor. If used with other resolutions, some scaled or processed pictures may appear on the screen. The set has been preadjusted to the mode 1920 x 1080 @ 60 Hz. G Some dot defects may appear on the screen, like Red, Green or Blue spots. However, this will have no impact or effect on the monitor performance. G Do not press the LCD screen with your finger for a long time as this may produce some temporary distortion effects on the screen. G Avoid keeping a fixed image on the set's screen for prolonged periods of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. 17