LG M8004R Service Manual - Page 10
Room Air Conditioner, Installation
View all LG M8004R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installation BEFORE INSTALLATION 1. Insert the guide panels into the guides of the air conditioner. Fasten the curtains to the unit with screws (TYPE A) as shown Figure. 5. 2. Cut the adhesive-backed seal strip (TYPE D) to the window width. Remove the backing from the seal strip and attach the seal strip to the underside of the bottom window. (Figure. 6) NOW START INSTALLATION 1. LOCATING UNIT IN WINDOW Open the window and mark center line on the center of the inner sill, as shown in Figure. 6. 2. ATTACH L BRACKET a. Install the L brackets behind the inner window sill, with the short side of bracket as shown. Use the 2 screws (TYPE A) provided. b. The bracket helps to hold unit securely in place. Be sure to place bracket edge flush against back of inner sill. See Figure. 7. CAUTION: During the following step, hold unit firmly until window sash is lowered to top channel behind side panel frames. Personal injury or property damage may result if unit falls from window. Type A Figure 5 SEAL STRIP (TYPE D) Type A Figure 6 INNER SILL CENTER LINE ROOM SIDE Figure 7 INNER SILL OUTER SILL TYPE A INSIDE CENTER LINE 3. INSTALL THE AIR CONDITIONER IN THE WINDOW a. Carefully lift the air conditioner and slide it into the open window. Make sure the bottom guide of the air conditioner drops into the notches of the L bracket. See Figure. 8. IMPORTANT : When the air conditioner drops into the L bracket, the air conditioner will be centered in window opening as shown in Figure. 9. b. While steadying the air conditioner, carefully bring the window sash down behind the upper guide of the air conditioner, as shown in Figure. 10. 8" SHORT SIDE 8" OUTSIDE Figure 8 L BRACKET C ool E nergy S aver F F1 LOW F2 ME D F3 HIGH Fan Dry T imer TE MP Figure 9 WINDOW FRAME UPPER GUIDE C enter Line SEAL BOTTOM GUIDE ABOUT 1/4" 10 Room Air Conditioner Figure 10 L BRACKET