LG MC7647B Owners Manual - Page 4

Unpacking &amp

Page 4 highlights

Unpacking & Installing By following the basic steps on these two pages you will be able to quickly check that your oven is operating correctly. Please pay particular attention to the guidance on where to install your oven. When unpacking your oven make sure you remove all accessories and packing. Check to make sure that your oven has not beendamaged during delivery. Unpack your oven and place it on a flat level surface. Place the oven in the level location of your choice with more than 85cm height but make sure there is at least 30cm of space on the top and 10cm at the rear for proper ventilation. The front of the oven should be at least 8cm from the edge of the surface to prevent tipping. An exhaust outlet is located on top or side of the oven. Blocking theoutlet can damage the oven. HIGH RACK LOW RACK ROTATING RING METAL TRAY THIS OVEN SHOULD NOT BE USED FOR COMMERCIAL CATERING PURPOSES

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33

Unpacking &
Installing
By following the basic steps on these two pages you will be able to quickly check that your oven is operating
correctly. Please pay particular attention to the guidance on where to install your oven. When unpacking your
oven make sure you remove all accessories and packing. Check to make sure that your oven has not
beendamaged during delivery.
Place the oven in the level location of your choice with
more than 85cm height but make sure there is at least
30cm of space on the top and 10cm at the rear for proper ventilation.
The front of the oven should be at least 8cm from the edge of the
surface to prevent tipping.
An exhaust outlet is located on top or side of the oven.
Blocking theoutlet can damage the oven.
Unpack your oven and place it on a flat level surface.
THIS OVEN SHOULD NOT BE USED FOR COMMERCIAL
CATERING PURPOSES
HIGH RACK
LOW RACK
METAL TRAY
ROTATING RING