LG NB3740 Owners Manual - Page 20
Wireless network setup
View all LG NB3740 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Connecting 20 Connecting Wireless network setup For the wireless network connection, the unit needs to be set up for network communication. This adjustment can be done from the [Settings] menu. Adjust the [NETWORK] setting as follow. Setting up the access point or the wireless router is required before connecting the unit to the network. ,,Note Preparation 2 Before setting the wireless network, you need to: -- connect the broadband internet to the wireless home network. -- set the access point or wireless router. yy WEP security mode generally have 4 keys available on an access point setting. If your access point or wireless router use WEP security, enter the security code of the key "No.1" to connect on your home network. yy An Access Point is a device that allows you to connect to your home network wirelessly. -- note the SSID and security code of the network. 4. Use W/S/A/D to select the IP mode between [Dynamic] and [Static]. 1. Select [Connection Setting] option in the Normally, select [Dynamic] to allocate an IP [Settings] menu then press ENTER (b). address automatically. 2. Read the preparations for the network settings and then press ENTER (b) while [Start] is highlighted. ,,Note If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using W/S/ A/D and numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part. If wired network is not connected to the unit, all available networks are displayed on the screen. 3. Use W/S to select a desired SSID of wireless network and press ENTER (b). 5. Select [Next] and press ENTER (b) to apply network settings. If you have security on your access point, you need to input the security code as necessary. ,,Note If you use other characters than the english alphabet or digits for the SSID name of your access point or wireless router, it may be displayed differently. Network connection status is displayed on the screen. 6. Select [OK] and press ENTER (b) to complete the network connection.