LG OLED77W7P Setup Guide - Page 23
Wall Material, Tools, Thickness
View all LG OLED77W7P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4 Set the wall mount on the wall by aligning to the location of the hole. And, set the angle adjusting part to face upward. 5 Align the wall mounting screw to the hole and tighten it. Then, fasten the screws at torque of 45 kgf/cm (39.06 lbf/in) to 60 kgf/cm (52.08 lbf/in). Wall mounting screw ••Check the material of the wall and the thickness of the finishing. ••Use the Wall mount anchor for wall material of concrete, light concrete, strong natural stone, soft natural stone masonry brick and hallow block that do not crack. Wall Material Tools Wall Thickness Concrete Brick Natural stone Metal Panel Wall mounting anchor, Wall mounting screw, Drill bit (Ø 3 / 6 / 8) 70 mm (2.7 inches) Plywood EPS Panel Wall mounting screw, Drill bit (Ø 1.8) 30 mm (1.1 inches) Penetrate the wall Plasterboard + Plywood 30 mm (1.1 inches) ••Do not mount the device on the walls made from plasterboard or medium density fiberboard (MDF). In this case, the anchor and screws must be inserted into the concrete behind the finish surface. If there is no concrete on the other side, then you must first install a separate hanger to securely install the anchors and screws. ••When installing the product on wall material not designated, install the product so that each location can withstand the pull out load of 70 kg (154.3 lbs) and shear load of 100 kg (220.4 lbs) or above. ••Use the Ø 8 mm (0.3 inches) drill bit for concrete and hammer (Impact) drill. ••Make sure that children do not climb on or hang on the TV. ••Use a platform or cabinet that is strong and large enough to support the TV securely. ••When installing the product, first check that the wall is strong enough. Use the anchors and screws provided. -- If you use anchors and screws that are not specified by the manufacturer, they may not hold the weight of the product, causing safety issues. ••Be sure to use the accessory cable provided. Otherwise, friction between the product and the wall may cause damage to the connector. ••When drilling holes into the wall, make sure you use a drill and drill bit with the specified diameter. Ensure that you also follow the instructions regarding the depth of the holes. -- Otherwise, the product may be installed incorrectly and cause safety issues. ••Wear safety gloves when installing the product. Do not use your bare hands. -- Otherwise, it may cause personal injury. ••If some parts of the wall mount do not touch the wall after it is attached, in addition to the other mounting hardware, add the double sided tape included with the accessories to stick the mount to the wall. ••If you want to connect the TV Cable is connected to the back panel partition, please use the enclosed Punching Guide. 7 ENGLISH