LG RU-44SZ51D Owners Manual - Page 11

VCR Connections 1 Locate the Antenna jack on the back of your TV. Connect this to RF out jack on the back of your VCR. Or, find the composite video and audio jacks on the back of your VCR, and connect them following the instructions provided with your equipment. You may connect either the composite video or the S-Video cables to your TV. (Do not connect both the composite and the S- Video cables. In the event that you connect both composite and the SVideo cables, only the S-Video will work.) Cable TV Wall Jack Panel Antenna RF Coaxial Wire (75 ohm) Round Wire (75 ohm) Back AV Panel Output In 3 4 Switch Out Audio Video S-Video LR ANT IN +75 Ω S-VIDEO MONITOR VIDEO VIDEO OUT INPUT 2 INPUT 1 VIDEO MONO (L) AUDIO (R) A/V cables not included with TV VCR To hear stereo sound from cable or your VCR, you will need to connect A/V cables as well as the wire that runs from the VCR to your TV. If you want to receive your signals on Channel 3 or 4, locate the Out to TV jack on your VCR. Connect a cable from the Out to TV jack to the Antenna In jack on the back of your TV. After connecting external equipment to the TV, don't display a still picture for a long time on the screen. Doing so may damage the TV screen. PAGE 11