LG RZ-15LA70 Service Manual - Page 6

SPECIFICATION NOTE : Specifications and others are subject to change without notice for improvement. 1. Application range This specification is applied to ML-041B chassis. 2. Requirement for Test Testing for standard of each part must be followed in below condition. (1) Temperature: 25°C ± 2°C (2) Humidity: 65% ± 10% (3) Power: Standard input voltage (AC 100-240V, 50/60Hz) (4) Measurement must be performed after heat-run more than 30min. (5) Adjusting standard for this chassis is followed a special standard. 3.General Specification No. Item 1 Maker Type ActiveDisplay Area Pixel Pitch [mm] Electrical Interface Color Depth Size [mm] Surface Treatment Operating Mode Back light Unit R/T Typ. 2 Maker Type ActiveDisplay Area Pixel Pitch [mm] Electrical Interface Color Depth Size [mm] Surface Treatment Operating Mode Back light Unit R/T Typ. 3 Maker Type ActiveDisplay Area Pixel Pitch [mm] Electrical Interface Color Depth Size [mm] Surface Treatment Operating Mode Back light Unit R/T Typ. Specification LPL TFT Color LCD Module 15.0 inches(380.16mm) diagonal(Aspect 4:3) 0. 0.297mm(H)x0.297mm(V)xRGB LVDS 6BIT WITH FRC, 16,777,216 colors 332.8(H)x262.2(V)x18(D) Anti Glare(HAZE 3%), Hard Coating(3H) Normally Black, 4 CCFL(4 lamps) R.T.:10ms + F.T.:22ms (MAX) HYDIS TFT Color LCD Module 15.0 inches(380.16mm) diagona 0. 0.297mm(H)x0.297mm(V)xRGB LVDS RGB 6-BIT 16,194,277Colors 331.6(H)x254.7(V)x12.7(D) HAZE25,Hard Coating, ANTI- Glare (3H) Normally Black 4 CCFL(4 lamps) T total(Tr+Td) = 25ms CMO TFT Color LCD Module 15.0 inches(380.16mm) diagona 0. 0 304.1mm(H)x228.1mm(V)xRGB LVDS RGB 6-BIT 16,194,277Colors 331.6(H)x254.6(V)x13(D) Hard Coating, ANTI- Glare (3H) Normally WHITE 4 CCFL(4 lamps) R.T.:22ms + F.T.:38ms (MAX) Remark LPL HYDIS CMO