LG S3MFBN Owners Manual - Page 44
Operation, Performance
View all LG S3MFBN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
TROUBLESHOOTING 43 ENGLISH Operation Problem Control panel won't respond The cycle won't start Possible Cause Control panel or button has dirt on it Control panel is locked Start/Pause was not touched after the cycle was set. Solutions Dirt or foreign objects on the control panel will interfere with the operation of the buttons. Clean the control panel. Disable the Control Lock function. See Locking the Controls, page 34. Touch Start. Cycle is producing steam There may be a period of inactivity while steam is produced. Control panel is locked Disable the Control Lock function and touch Start. See Locking the Controls, page 34. Performance Problem Possible Cause Solutions Clothes are wet at the end of the cycle Filter is clogged or grill is upside down Clean the lint filter. Insert the grill with the holes on the right side. Door gasket is damaged If the rubber door gasket is damaged, it leaves a gap in the door seal, affecting performance of the appliance. Call for service. Clothes caught in door Make sure all items are completely in the cabinet and not stuck in the door, blocking it from closing completely. Run the cycle again. Odor is not removed at end of cycle Clothes were stored for a long period of time or are stained with a strong-smelling substance Odors can be particularly difficult to remove from clothes that have been stored for long periods or have strongsmelling, oily stains. Wash the clothes first, before using the Styler. Wrinkles are not reduced at end of cycle Clothes were stored for a long period of time Wrinkles may be very difficult to reduce if set for a long time, especially in cotton and linen fabrics. Iron clothes that have been stored for a long period of time before treating them with the Styler, to reduce wrinkles more effectively. Clothes have an unpleasant odor at end of cycle Appliance has not been used for a long time or water tanks and filters have not been cleaned Check for dirt or foreign objects in the water supply and water drain tanks. Clean the filters and water tanks. Functions are not operating properly Detergent or fabric softener put in water supply tank Do not use anything but clean water in the water supply tank.