LG SH2 Owners Manual - Page 16

16 Operating Operating AUTO POWER On/Off Auto function change This unit automatically turns on by an input source : Optical, LG TV or Bluetooth. When you turn on your TV or an external device connected to this unit, this unit recognizes the input signal and select the suitable function. You can hear the sound from your device. If you try to connect your Bluetooth device, this unit turns on and the unit will be connected your Bluetooth device. This unit recognizes input signals such as optical, Bluetooth and LG TV and then changes to the suitable function automatically. When an optical signal comes in When you turn on the external device connected to this unit by an optical cable, this unit will change the function to optical. You can hear the sound from your device. This function turns on or off you press AUTO POWER ON/OFF. When you try to connect ,,Note 3 yy After the unit is turned on by AUTO POWER function, it will be automatically turn off if there is no signal for a certain period of time from the TV connected by LG Sound Sync (Optical/Wireless). a BLUETOOTH device When you try to connect your Bluetooth device to this unit, the Bluetooth function is selected automatically. Play your music on the Bluetooth device. yy After the unit is turned on by AUTO POWER function, it will be automatically turn off if there is no signal for a certain period of time from the external device. yy If you turned off the unit directly, it cannot be turned on automatically by AUTO POWER function. However the unit can be turned on by AUTO POWER function when optical signal comes in after 5 seconds of no signal. When an LG TV signal comes in When you turn on your LG TV connected by LG Sound Sync (Wireless connection), this unit changes the function to LG TV automatically. You can hear the sound from your TV. ,,Note To change to optical function, it needs 5 seconds of no signal. yy Depending on the connected device, this function may not operate. yy If you disconnect Bluetooth connection by this unit, some Bluetooth devices try to connect to the unit continually. Therefore it is recommended to disconnect the connection before you turn off the unit. yy When you turn this unit on for the first time, Auto Power function is turned on. yy To use this function, the main unit must be registered in paired devices list of Bluetooth device. yy You can set the AUTO POWER function only when this unit is turned on.