LG SL5Y Owners Manual - Page 20

Connecting 20 Connecting How to Affix the Ferrite Core Ferrite core may not be provided depending on each nation's regulations. Affix the Ferrite Core for speaker cables You must affix a ferrite core in order to reduce or eliminate electrical interference. 2 1. Pull the stopper [a] of the ferrite core to open. 2. Wind the speaker cables around the ferrite core twice. 3. Close the ferrite core until it clicks. ,,Note yy If there is a strong electromagnetic wave product nearby, interference may occur. Put the main unit and wireless receiver away from there. yy The wireless receiver will automatically switch to standby mode in a few minutes after the sound bar is turned off. When the wireless receiver is in standby mode, the LED will turn on in red. yy When you turn on the sound bar, the wireless receiver will turn on and the LED will change to yellow - green and then the rear speakers makes sound within a few seconds. yy It takes a few seconds (and may take longer) for the main unit and Wireless Receiver to communicate with each other. yy Use the rear speaker at least 30 cm (11.8 inch) away from either TV screen or PC monitor. yy When the wireless receiver is being connected or disconnected with the main unit, output sound may be interrupted. yy Set the distance between the sound bar and the wireless receiver as close as possible and keep them away from the device (ex. wireless router, microwave oven, etc.) over 1 m (3.3 ft) to prevent wireless interference. >(3!1.3mfPt)