LG SRFB27S3 Owners Manual - Page 18
Connecting Refrigerator to, Water Supply
View all LG SRFB27S3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
en-us_main.book.book Page 18 Monday, February 20, 2023 9:41 AM 18 INSTALLATION 2 Fit the hinge a over the hinge lever latch b and slot it into place. Rotate the lever c clockwise and fasten the hinge. NOTE • Disassembling/Assembling the Water Lines 3 Connect all the wire harnesses and the ground wire. e Collet f Tube g Insert line h Clip • Gently press the collet and insert the tube until only one line shows on the tube. 4 Push the water supply lines into the hole on the top case and pull them through the backplate. Assembling the Hinge Cover Position the hinge cover in its place. Insert and tighten the cover screws. 5 Hold the water supply connection and gently push in the collet d to connect the water supply lines as shown. Insert the tube at least 5/8 inch (15 mm) into the connector. Insert the clip on the joint to fasten the tubes in place. Connecting Refrigerator to Water Supply Before Beginning These instructions assume you have an existing water supply connection for the refrigerator. If necessary, call a qualified plumber to install a water supply line for the refrigerator. • Turn the icemaker OFF if the refrigerator will be used before the water line is connected. • Do not install the icemaker tubing in areas where the ambient temperatures fall below freezing. WARNING • Connect to potable water supply only. CAUTION • To prevent burns and product damage, only connect the refrigerator water line to a cold water supply.