LG WD100CB Owners Manual - Page 31
ERROR CODES continued
View all LG WD100CB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
ENGLISH TROUBLESHOOTING 31 Error Codes (continued) Problem The display shows: The display shows: The display shows : The display shows: The display shows: The display shows: The display shows: Possible Cause Solutions If the rebalancing operation (see The automatic attempt to rebalance the load above) is not successful, this error was not successful. The cycle has been will be displayed. paused to allow the load to be manually adjusted. The load is too small. Small loads may need additional items to be added to allow the washer to balance the loads. Heavy articles are mixed with lighter items. The load may have heavy items loaded with lighter items. Always try to wash articles of somewhat similar weight to allow the washer to evenly distribute the weight of the load for spinning. The load is out of balance. Manually redistribute the load if articles have become tangled preventing the automatic distribution from working properly. Control error. Unplug the power cord and contact your nearest LG service center. Water level is too high due to a faulty water valve. Close the water faucets, unplug the washer, and call for service. The water level sensor is not working correctly. Close the water faucets, unplug the washer, and call for service. A motor error has occurred. Allow the washer to stand for 30 minutes and then restart the cycle. If the LE error code persists, call for service. It is time to run the Tub Clean cycle. Empty the tub, add a diluted solution of 1/4 cup bleach to 1 qt. water to the tub, and select the Tub Clean cycle. To skip the Tub Clean cycle when alerted, press the cycle selector buttons. The message continues to appear for a few more wash cycles and then disappears until the next scheduled tub clean. Pedestal washer is being operated The pedestal washer will not operate as a without a full-size washer. standalone unit. It must be stacked under a Stacking switch is not working full-size LG appliance. properly. The stacking switch will not operate properly if the unit is stacked under a non-LG ap- pliance, or an LG appliance manufactured before 2009. MFL68267005_E.indd 31 2018. 7. 18. 오전 9:22