LG WM1333HW Owners Manual - Page 19
or safety pins may be in drum, or pump., Rattling and, clanking noise, Thumping sound, Water does - installation instructions
View all LG WM1333HW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
* This washing machine is equipped with automatic safety functions which detect and diagnose problems at an early stage and react appropriately. When the machine does not function properly or does not function at all, check the following points before you call the Service Department. Rattling and clanking noise Thumping sound Vibrating noise Water leaks Excessive suds • Foreign objects such as coins or safety pins may be in drum or pump. • Heavy wash loads may produce a thumping sound. This is normal. • Have all the transit bolts and packing been removed? • Wash load may be unevenly distributed in the drum. • Are all the feet resting firmly on the ground? • Fill hose connection is loose at tap or washer. • House drain pipes are clogged. • Too much detergent or unsuitable detergent. Stop washer and check drum and drain filter. If noise continues after washer is restarted, call for service. If sound continues, washer is probably out of balance. Stop and rearrange wash load. See Installation Instructions removing shipping bolts. Stop washer and rearrange load. for wash Adjust the leveling feet. Make sure all four feet are in firm contact with the floor, while the washer is in the spin cycle with a load. Check and tighten hose connections. Unclog drain pipe. Contact plumber if necessary. Reduce detergent amount or use HE (High Efficiency) detergent. Water does not ente washer or it enters slowly Water in the washer does not drain or drains slowly • Water supply is not adequate in area. • Water supply tap is not completely open. • Water inlet hose is bent. • The filter of the inlet hose clogged. • Drain hose is bent or clogged. • The drain filter is clogged. Duseesigonnelyd HsEpe(cHiiaglhly to Efficiency) detergent Check another tap in the house. Fully open tap. Straighten hose. Check the filter of the inlet hose. Clean and straighten the drain hose. Clean the drain filter.