LG WM2011CW Owner's Manual (English) - Page 31
Problem, Possible Causes, Solutions
View all LG WM2011CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
TROUBLESHOOTING BEFORE CALLING FOR SERVICE (cont.) Problem Wrinkling The display shows: The display shows: Possible Causes • Washer not unloaded promptly. • Washer overloaded. • Hot and cold water inlet hoses are reversed. • Load is too small. • Load is out of balance. • The washer has an imbalance detection and correction system. If individual heavy articles are loaded (bath mat, bath robe, etc.) and the imbalance is too great, the washer will make several attempts to restart the spin cycle. If an imbalance is still detected, the washer will stop and the error code will be displayed. Solutions • Always remove items from the washer as soon as the cycle is complete. • The washer can be fully loaded but the drum should not be tightly packed, and the door should close easily. • Hot water rinse can set wrinkles in garments. Check the inlet hose connections. • Add 1 or 2 similar items to help balance the load. • Rearrange items to help balance the load. • Control error. • Unplug the washer and call for service. The display shows: • Water level is too high due to a faulty water valve. • Close the water taps, unplug the washer, and call for service. The display shows: • The water level sensor is not working correctly. • Close the water taps, unplug the washer, and call for service. The display shows: The display shows: • Thermal overload protection circuit in the motor has been tripped. • A power failure has occurred. • Allow the washer to stand for 30 minutes to allow the motor to cool; then restart the cycle. If the LE error code still appears, unplug the washer and call for service. • Restart the cycle. 31