LG WM2032HS Owner's Manual - Page 16

HOW TO USE THE WASHER OPTION 1. Prewash • Use this option for loads that need pretreatment. Adds 16 minutes prewash and drain. - When using Prewash option, do not use liquid detergent in the Main Wash Compartment. Use powdered for the main wash. 2. Stain cycle • Adds time to the wash and rinse for better stain removal. • Automatically provides a rinse. 3. Quick Cycle • The Quick cycle offers a quick cycle time. • Suggested uses include freshening newly purchased clothes, or clothing that has been packed away. 4. Extra Rinse • This option provides an additional rinse. • Use this option to ensure the removal of detergent or bleach residue from garments. 5. Rinse+Spin • Use this option to rinse and then spin. 6. Delay Wash • Allows the start of any cycle to be delayed for 1~19(12, 9) hours. • Choose the wash cycle for your load, and then press the Delay Wash button once for one hour or press the button again to increase the delay wash time up to 19(12, 9) hours in one hour increments. 16 CHILD LOCK • Use this option to prevent unwanted use of the washer. Press and hold Soil Level and Beeper button for 3 seconds to lock/unlock control. • When Child lock is set, " " blinks and all buttons are disabled except the Power button. You can thereby lock the washer while it is operating. DOOR LOCKED • Lights whenever the door of the washer is locked. • The door can be unlocked by pressing the Start/Pause button to stop the washer. NOTE: If the water temperature or the level is too high, the door cannot be unlocked. Do not try to force the door open when DOOR LOCKED lights on. STATUS INDICATOR • These lights show elapsed time of the cycle the washer is operating. EST. TIME REMAINING • This display shows: a) the estimated time remaining in the cycle when operating, b) the error code when an error has been detected. START/PAUSE • Use this button to start/stop the washer. POWER • Use this button to turn the Power On/Off.