LG WM2496HWM Owner's Manual - Page 17

HOW TO USE THE WASHER OPTION 1. Prewash • Use this option for loads that need pretreatment. Adds 16 minutes prewash and a spin cycle. 2. Rinse+Spin • Use this option to rinse and then spin. 3. Extra Rinse • This option provides an additional rinse. • Use this option to ensure the removal of detergent or bleach residue from garments. 4. Stain cycle • Adds more time to the wash and rinse cycles for better stain removal. • Automatically provides a rinse. 5. Water Plus • Adds extra water to the wash and rinse cycles for superior results. 6. SPINSENSETM • SPINSENSETM can be used when there is a vibration problem, especially on wood floor installations. • To operate SPINSENSETM press and hold the Stain Cycle button for 3 seconds when the washing machine is running on any cycle. • When SPINSENSETM has been selected, the Spin Speed button light will blink on and off continually to indicate that the SPINSENSETM function has been selected. • Push and hold the Stain Cycle button again for 3 seconds to cancel SPINSENSETM. • Once SPINSENSETM has been selected, if will continue to function even if interrupted by a power failure. 7. Tub Clean • A buildup of detergent residue can occur in the wash tub over time and can lead to a mildewy or musty smell. The Tub Clean cycle is specially designed to remove this buildup. • Press and hold the Extra Rinse button for 3 seconds to activate this cycle. • Add liquid chlorine bleach to the bleach compartment. • After the cycle has ended, open the door and allow the drum interior to dry completely. NOTE: Do NOT use this cycle with clothes, and do NOT add detergent or fabric softener. 16 EST. TIME REMAINING • This display shows the estimated time remaining in the cycle when operating. • This washer automatically detects the wash load (weight) and optimizes the washing time. After detecting, the display will show the adjusted time remaining. STATUS INDICATOR • It shows elapsed time of the cycle the washer is operating. CHILD LOCK • Use this option to prevent unwanted use of the washer. Press and hold PRE WASH button for 3 seconds to lock/unlock control. • When Child lock is set, " " blinks and all buttons are disabled except the Power button. You can lock the washer while it is operating. DOOR LOCKED • Displays whenever the door of the washer is locked. • The door can be unlocked by pressing the Start/Pause button to stop the washer. NOTE: If the water temperature or the level is too high, the door cannot be unlocked. Do not try to force the door open when is displayed.