LG WM2901HVA Owner's Manual - Page 19

CONTROL PANEL FEATURES HOW TO USE 4 7 6 LOAD SENSING WASH RINSE SPIN 8 1 2 3 5 1 POWER ON/OFF BUTTON Press to turn the washer ON. Press again to turn the washer OFF. NOTE: Pressing the ON/OFF button during a cycle will cancel that cycle and any load settings will be lost. 2 CYCLE SELECTOR KNOB Turn this knob to select the desired cycle. Once the desired cycle has been selected, the standard presets will be shown in the display. These settings can be adjusted using the cycle setting buttons anytime before starting the cycle. 3 START/PAUSE BUTTON Press this button to START the selected cycle. If the washer is running, use this button to PAUSE the cycle without losing the current settings. NOTE: If you do not press the START/PAUSE button within 4 minutes of selecting a cycle, the washer automatically turns off. 4 STEAM BUTTON Press the STEAM button to add steam to the selected cycle for added cleaning power. NOTE: Steam can only be added to the following cycles: STEAMFRESH™, SANITARY, BULKY/LARGE, PERM. PRESS, COTTON/ NORMAL, BRIGHT WHITE™, HEAVY DUTY and ALLERGIENE™. 5 CYCLE SETTING BUTTONS Use these buttons to select the desired cycle options for the selected cycle. Press the button for that setting until the indicator light for the desired value is lit. 6 DELAY WASH BUTTON Press this button to delay the start of the wash cycle. Each press of the button increases the delay time by one hour, up to 19 hours. 7 LED DISPLAY The display shows the settings, estimated time remaining, options, and status messages for your washer. The display will remain on through the cycle. 8 OPTION BUTTONS The option buttons allow you to select additional cycle options and will light when selected. Certain buttons also allow you to activate special functions by pressing and holding the button for 3 seconds. For detailed information about the individual options, please see the following pages. 19