LG WP600 Owners Manual - Page 63
Input Manager], SIMPLINK Setup], Display power On/Off sync], Transmission, Reception, Send Only
![]() |
View all LG WP600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
47 ENGLISH [Input Manager] You can set the PC or DTV label for each external input. [SIMPLINK Setup] •• When the [SIMPLINK Setup] is set to [On], you can use the SIMPLINK provided by LG Signage. •• [Device ID]: Set the ID of the device connected via CEC wiring. You can choose a value between [All] and [E]. •• [Standby]: Sets the scenarios for sending and receiving the OpStandBy (0x0c) command. Detailed scenarios are as follows: All Send Only Receive Only Transmission O O X Reception O X O [Display power (On/Off) sync] (Depending on model) (This function is only supported by the Signage box) •• This is a function to control the power of the Display connected to the HDMI OUT to be synchronized with the power of the Signage box. •• When the power of the Signage box is changed from Off to On, it turns on the Display and tries to switch the input to the Signage box screen. •• When the power of the Signage box is changed from On to Off, it turns off the Display. •• [On/Off]: Enable/Disable this function NOTE •• It is necessary to enable the CEC function on the Display
![](/manual_guide/products/lg-wp600-owners-manual-715e81b/63.png)