LG XBR716 Owner's Manual - Page 19
Recording Settings, Disc Settings
View all LG XBR716 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
HOOKUP AND SETTINGS Recording Settings Disc Record Mode You can set the picture quality for recording; XP (High Quality), SP (Standard Quality), LP (Low Quality), EP (Extend Quality) Disc Settings Initialize If you load a completely blank disc, the recorder will initialize the disc. • DVD-R: The recorder initialize the disc to Video mode. The recording mode will always be Video mode. • DVD-RW: The Initialize menu will appear. Select [VR Mode] or [Video Mode] then press ENTER. • DVD+RW/DVD+R: The Initialize menu will appears. Select [OK] then press ENTER. Also, you can reformat the DVD-RW/DVD+RW from the Setup menu as below. 1. Select the [Disc Record Mode] option then press B. 2. Use v / V to select a desired Disc Record Mode (XP, SP, LP or EP). 3. Press ENTER to confirm your selection, then press HOME to exit the menu. VCR Record Mode You can set the picture quality for VCR recording; SP (Standard Play), SLP (Super Long Play). DV Record Audio You need to set this if you have a camcorder using 32kHz/12-bit sound connected to the front panel DV IN jack. Some digital camcorders have two stereo tracks for audio. One is recorded at the time of shooting; the other is for overdubbing after shooting. On the Audio 1 setting, the sound that was recorded while shooting is used. On the Audio 2 setting, the overdubbed sound is used. 1. Select the [Initialize] option then press B. [Start] icon is highlighted. 2. Press ENTER. • In case of DVD-RW, use b / B to select a desired Disc Initialize Mode (VR Mode or Video Mode) then press ENTER. • In case of DVD+RW, use b / B to select [OK], and press ENTER. It takes a few moments to format the disc. Caution If you want to change the disc format, everything recorded on the disc will be erased. Auto Chapter During recording, chapter markers are added automatically at fixed intervals. You can set this interval to 5 minutes or 10 minutes. To turn off automatic chapter marking, select [None]. 19