Lacie 2big Network 2 User Manual - Page 17
STEP 4: Completing the Setup Wizard - default password
View all Lacie 2big Network 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
LaCie 2big Network 2 • DESIGN BY NEIL POULTON User Manual Connecting to a Network page 17 2.4. STEP 4: Completing the Setup Wizard The first time you log in to the Dashboard, the Setup Wizard will load in you browser (Fig. 13). The Setup Wizard consists of three sections to be filled out that will help you to configure your 2big Network 2. a. General Settings: Modify the Machine Name (optional - a name may only contain letters (case sensitive), numbers, or a hyphen. Maximum of 15 characters) and create the admin login name and password (minimum 4 characters). IMPORTANT INFO: You may enter 4 to 20 characters using letters (case sensitive), numbers, the hyphen, and the underscore. No other symbols, punctuation, or spaces may be used. Do not begin or end with a hyphen and/or an underscore. IMPORTANT INFO: If for whatever reason you do not complete the Setup Wizard, the default login credentials will be admin/admin. b. Time Configuration: Select whether the time and date should be set manually or synchronized with a third party server. Press the Test button to ensure synchronization is working. When the time synchronization option is selected, you can't modify the time and date settings. c. Disk Configuration: Specify how much of the total storage should be made available when the drive is connected to your computer via USB, and how much for when your computer is connected to the network. You can modify this amount from 0 GB to up to half the total capacity (default is 0 GB). If you choose to increase the USBShare size, it is necessary to format the share. After completing the Setup Wizard, navigate to Drive Information > USB Drive and select Format (for details, see 4.11. Dashboard: Drive Information). Once you've finished, you can proceed to the Dashboard by clicking Finish (Fig. 13). Your 2big Network 2 is configured and ready to use. Proceed to the following sections: 3. Accessing and Transferring Files and 4. Administering Your LaCie 2big Network 2. Fig. 13 IMPORTANT INFO: LaCie strongly recommends you do not increase the USBShare size to more than 128 GB unless you format USBShare to either NTFS or HFS+ using your operating system's native disk utility. NOTE: The machine name can be modified later from the Dashboard. NOTE: You can also change the language on this page (Fig. 13, d). TECHNICAL NOTE: If you need to assign a static IP address, refer to section 2.6. Assigning a Static IP Address for details.