Lacie 301294U User Manual - Page 18

LaCie Big Disk USB 2.0 User's Manual 3. Installing Your LaCie Drive page 18 Mac OS 9.x - USB 1 After following the steps in 3.1. Connecting The Power Supply, power on the drive by pressing the On/Off button on the front of the drive. 2 Connect the Hi-Speed USB 2.0 cable into the Hi-Speed USB 2.0 port on the back of the LaCie Big Disk USB 2.0. Tech Note: Apple does not support the Hi-Speed USB 2.0 standard under Mac OS 9.x. You will be limited to USB 1.1 speeds. Tech Note: For more information about USB, please see sections: 3 Connect the other end of the Hi-Speed USB 2.0 cable into an available USB port* on your computer. • 2.3.2. USB • 5.3. Optimizing Data Transfers • 7. USB Questions & Answers. 4 With Silver Lining pro you will have to reformat in HFS+ . If you need to cross platform, you will have to use several FAT 32 partitions. For more informations, please refer to 4.1.1 Formatting And Partitioning Your LaCie Drive 5 Your drive should appear on your desktop. It may take a few seconds for your computer to recognize the drive and for it to appear on the dektop. Mac OS Drive Icons Your LaCie Big Disk USB 2.0 will now be ready for use. You can then use the formatting and partitioning capabilities in Silverlining Pro to configure your hard drive system. Please refer to the Silverlining Pro documentation on the LaCie Storage Utilities CD-ROM for more information. Computer models vary. Please consult your computer's User's Manual for the exact location of your interface.