Lacie Rugged USB 3.0 Quick Install Guide - Page 4

Setup Steps 1. Connect the USB 3.0 cable to the drive and to a USB 3.0 port on your computer. NOTE: If your computer does not have a USB 3.0 port, you can connect the included USB 3.0 cable to a USB 2.0 port. In this case, file transfers will be limited to USB 2.0 speeds. 2. After a few seconds, the drive will mount in My Computer (Windows) or on your desktop (Mac). USB Connection Note: If the USB bus on your computer does not provide the necessary power to operate your LaCie Rugged, disconnect the USB cable, connect the USB power cable to your computer and to the Rugged and then reconnect the USB cable. USB power cable 3. Before using your drive, LaCie Setup Assistant software must be launched to format your drive. It will: • O ptimize your drive according to your needs • Copy the manual and utilities on your drive