Lacie d2 Quadra User Guide - Page 25
Connecting Multiple Devices - not recognized
View all Lacie d2 Quadra manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
LaCie d2 Quadra • Design by Neil Poulton User Manual 2.6. Connecting Multiple Devices FireWire 400 and FireWire 800 interfaces allow you to connect another hard drive, a DVD±RW writer or a digital video camera directly to the LaCie d2 Quadra (this connection is called "daisy-chaining"). To daisy-chain devices, you must be using the same interface (FireWire). Your computer will not recognize the daisy-chained device if the interfaces are mixed, i.e. a FireWire device attached to a drive that is connected to the computer via the Hi-Speed USB 2.0 interface. TECHNICAL NOTE: When you daisy-chain using a mix of interfaces (FireWire 400 and FireWire 800) the resultant speed will be limited to the lowest common denominator (FireWire 400 speeds). 1. Connect your LaCie d2 Quadra's power supply and host computer interface by following the steps in sections 2.1 to 2.3. 2. To attach a digital video camera*: a. Using the iLink/DV cable (sold separately), connect the 4-pin end of the cable to the 4-pin port on your digital camera. b. Connect the 6-pin end of the iLink/DV cable to the 6-pin FireWire port on the back of the LaCie Hard drive (C). To attach a FireWire peripheral: a. Connect the FireWire 400 or 800 cable into an available FireWire 400 or 800 port on your FireWire peripheral. b. Attach the other end of the FireWire 400 or 800 cable to an available FireWire 400 or 800 port on the LaCie d2 Quadra (C). 3. The digital camera should now appear under My Computer (Windows users) or on the desktop (Mac users). *Some cameras do not support this configuration or may downgrade your LaCie d2 Quadra's performance. Getting Connected page 25