Lantronix C6310-3340 C6310-3340 Product Brief - Page 2

Americas, Europe

Page 2 highlights

C6310-3340 Media Converters icon here Specifications Standards • FCC Part 68 • ETSI ES 203-021 (TBR21) • ISED CS-03 Analog Port • Connector: RJ11 FXS Mode • Impedance: 600 ohms • REN: 1.0 • Ring Cadence: 25 Hz FXO Mode • Impedance: 600 ohms • Battery Source: 48 VDC +/- 5V • Ringing Supply: 90Vp-p • Ring Frequency: 16-65 Hz Dip Switches • SW1 Up = FXO Down = FXS • SW2 Up = Normal Down = FXS Reversed • SW3 Up = U-Law Down = A-Law • SW4 not used • SW5 - SW8 Country Code Select Status LEDs • Pwr: On = power is on • FL: On = fiber link is up • ACTC: On = Off-Hook, Blink = Ringing, Off = On-Hook Dimensions • Width: 0.86" [22 mm] • Depth: 6.5" [165 mm] • Height: 3.4" [86 mm] Power Consumption • 2.0 Watts without the SFP Environment • Environment specs are dependent on the chassis chosen • Operating: 0°C to 50°C • Storage: -40°C to +85°C • Humidity: 5% to 95% (non-condensing) • Altitude: 0 - 10,000 ft. Weight • 1 lb. [0.45 kg] Compliance • Emissions: EN55032 Class A, FCC Part 15 Class A • Immunity: EN55024 • Safety: CE Mark Warranty • Lifetime Features ● Audio transmission of voice grade signals ● Supports ringing at distant end ● Supports Caller ID ● Configurable worldwide country formats ● Must be deployed in pairs - ION chassis card and stand-alone unit - ION chassis card and ION chassis card - Stand-alone unit and stand-alone unit ● Single product configurable to either FXO mode or FXS mode ● Automatic Ring Down supported when both converters are configured to FXS Mode ● SFP based product - Uses Gigabit Ethernet SFP Modules - Lantronix offers a wide variety of SFP modules to support multimode or singlemode fiber, as well as dual or single strand fiber installations ● SNMP Management supported when installed in a managed ION chassis ● Supports remote management of paired unit, in-band, over the fiber ● Electrical interface is provided through an RJ-11 female connector ● Field upgradeable firmware ● Only supports analog POTS lines ● Compatible with traditional telephone modems Ordering Information Part Number C6310-3340 Description Chassis Card Media Converter Twisted Pair (RJ-11) (5 km/3.1 mi.) to (1) SFP Slot (empty) Fiber Type, Optical Wavelength, Transmission Distance, and Link Budget all based on selected SFP module. Must be paired with another C6310-3340 or a stand-alone S6310-3340. Accessories Number SFP Modules Description C6310-3340 Supports any standard 1000Mbps SFP modules Contact Information Americas 800.422.7055 [email protected] www.lantronix.com NASDAQ: LTRX Europe +31 (0) 76.52.3.6.74 4 [email protected] Asia/Pacific +852 3955.0218 [email protected] China: +86.21.6237.8868 India: +91 994-551-2488 © 2022 Lantronix, Inc. All rights reserved. Lantronix is a registered trademarks of Lantronix, Inc. in the U.S. and other countries. All other trademarks are the property of their respective owners. Specifications subject to change without notice. MPB00132 Rev A

  • 1
  • 2

C6310-3340
Media Converters
© 2022 Lantronix, Inc. All rights reserved.
Lantronix is a registered trademarks of Lantronix, Inc. in the U.S. and other countries. All other trademarks are the property of their respective owners.
Specifications subject to change without notice. MPB00132 Rev A
Contact Information
Americas
800.422.7055
www.lantronix.com
NASDAQ: LTRX
Asia/Pacific
+852 3955.0218
China: +86.21.6237.8868
India: +91 994-551-2488
Europe
+31 (0) 76.52.3.6.74 4
Ordering Information
Accessories Number
Description
SFP Modules
C6310-3340 Supports any standard 1000Mbps SFP
modules
Part Number
Description
C6310-3340
Chassis Card Media Converter
Twisted Pair (RJ-11) (5 km/3.1 mi.) to (1) SFP Slot (empty)
Fiber Type, Optical Wavelength, Transmission Distance, and
Link Budget all based on selected SFP module.
Must be paired with another C6310-3340 or a stand-alone
S6310-3340.
Specifications
Standards ______________________________________________________
• FCC Part 68
ETSI ES 203-021 (TBR21)
• ISED CS-03
Analog Port _____________________________________________________
• Connector: RJ11
FXS Mode ______________________________________________________
• Impedance: 600 ohms
• REN: 1.0
Ring Cadence: 25 Hz
FXO Mode ______________________________________________________
• Impedance: 600 ohms
Battery Source: 48 VDC +/- 5V
• Ringing Supply: 90Vp-p
Ring Frequency: 16-65 Hz
Dip Switches ___________________________________________________
• SW1
Up = FXO
Down = FXS
• SW2
Up = Normal
Down = FXS Reversed
• SW3
Up = U-Law
Down = A-Law
• SW4
not used
• SW5 - SW8
Country Code Select
Status LEDs ____________________________________________________
• Pwr:
On =
power is on
FL:
On = fiber link is up
• ACTC:
On = Off-Hook, Blink = Ringing, Off = On-Hook
Dimensions ____________________________________________________
Width: 0.86” [22 mm]
Depth: 6.5” [165 mm]
Height: 3.4” [86 mm]
Power Consumption ____________________________________________
2.0 Watts without the SFP
Environment ____________________________________________________
Environment specs are dependent on the chassis chosen
Operating: 0°C to 50°C
Storage: -40°C to +85°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.
Weight _________________________________________________________
1 lb. [0.45 kg]
Compliance ____________________________________________________
Emissions: EN55032 Class A, FCC Part 15 Class A
• Immunity: EN55024
• Safety:
CE Mark
Warranty _______________________________________________________
• Lifetime
Features
Audio transmission of voice grade signals
Supports ringing at distant end
Supports Caller ID
Configurable worldwide country formats
Must be deployed in pairs
-
ION chassis card and stand-alone unit
-
ION chassis card and ION chassis card
-
Stand-alone unit and stand-alone unit
Single product configurable to either FXO mode or FXS mode
Automatic Ring Down supported when both converters are configured to FXS Mode
SFP based product
-
Uses Gigabit Ethernet SFP Modules
-
Lantronix offers a wide variety of SFP modules to support multimode or single-
mode fiber, as well as dual or single strand fiber installations
SNMP Management supported when installed in a managed ION chassis
Supports remote management of paired unit, in-band, over the fiber
Electrical interface is provided through an RJ-11 female connector
Field upgradeable firmware
Only supports analog POTS lines
Compatible with traditional telephone modems