Lantronix CWDM-A2A8xxLCR-B Series CWDM Series Quick Start Guide Rev B - Page 1

CWDM-xxxxxCR-B Mux/Demux and Optical Add/Drop Multiplexer Modules Quick Start Guide Lantronix Passive optical CWDM devices utilize thin-film filter technology. They are available in various wavelength combinations based on the entire wavelength spectrum (1270nm-1610nm in 20nm increments) defined by the ITU-T G.694.2 CWDM standard. The CWDM modules are available in two main configurations: Mux/Demux modules and Optical Add/Drop Multiplexer (OADM) modules. Each module is a pluggable device that slides into a one rack unit (1RU) chassis that can hold two modules and mount into a 19" equipment rack. Note: See the User Guide for important Product Description, Ordering Information, Application Examples, Unpacking, Rack Mount Safety Instructions, Installation, Front Panels, Fiber Cable Handling & Installation, CWDM and OADM Theory of Operation, CWDM Wavelength specifics, Specifications, Troubleshooting, and Product and Box Label information. Unpacking: Carefully unpack the mux. Verify you have received one mux, one support card, and one printed Quick Start Guide. Save the packaging for possible future use. Installation: The CWDM modules install into the optional CWDM-MB19R2 mounting bracket for installation in a free- standing rack. 1. Locate the CWDM module and bracket. 2. Mount the Bracket to the equipment rack using four screws. 3. Pull the CWDM mounting plungers fully out. 4. Slide the CWDM module into one of the slots. 5. Secure the CWDM module to the bracket. Front Panels Add/Drop Mux Front Panel: CWDM Front Panels: The CWDM modules have no LEDs as shown below. 4-Channel CWDM Mux Front Panel (CWDM-M551LCR-B) 33793 Rev. B 8-Channel CWDM Mux Front Panel (CWDM-M947LCR-B) http://www.lantronix.com/ Page 1 of 2