Lantronix E-100BTX-HT Series User Guide PDF 460.25 KB - Page 4

Transition Networks E-100BTX-FX-05 User Guide Installation CAUTION: Wear a grounding device and observe electrostatic discharge precautions when setting the 4-position DIP switch and jumpers. Failure to observe this caution could result in failure of the media converter. 4-Position DIP Switch The 4-position DIP switch is located on the side of the media converter. Use a small flat-blade screwdriver or a similar tool to set the recessed switches. 1. Auto-Negotiation up Enables Auto-Negotiation for the copper connection. down Disables Auto-Negotiation for the copper connection. 2. Pause Control up Enabled down Disabled 3. Link Pass-Through up Enabled down Disabled 4. Far-End Fault up Enabled down Disabled 33210 Rev. R http://www.transition.com/ Page 4 of 17