Lantronix EDS3000PS Quick Start Guide

Lantronix EDS3000PS Manual

Get Lantronix EDS3000PS PDF manuals and user guides View all Lantronix EDS3000PS manuals
Add to My Manuals
Save this manual to your list of manuals

Lantronix EDS3000PS manual content summary:

  • Lantronix EDS3000PS | Quick Start Guide - Page 1
    EDS3000PS Device Server Quick Start Guide ! Thank you for choosing Lantronix. Please register the EDS3000PS in order to receive notifications for firmware and documentation updates at www.lantronix.com/product-registration.
  • Lantronix EDS3000PS | Quick Start Guide - Page 2
    Guide 3. DEVICE DISCOVERY The EDS3000PS must have a unique IP address on your network. This IP address can be assigned automatically with DHCP, or you can assign it manually address. For detailed instructions, see the Lantronix visit https://www.lantronix.com/support/downloads © 2021 Lantronix,
  • 1
  • 2
1. HARDWARE OVERVIEW
2. INSTALLATION
EDS3000PS Device Server Quick Start Guide
1.
RTS
(Out)
2.
DTR
(Out)
3.
TX
(Out)
4.
GND
5.
GND
6.
RX
(In)
7.
DSR
(In)
8.
CTS
(In)
RS
-
232 Pin Assignment
!
Thank you for choosing Lantronix.
Please register the EDS3000PS in order to receive no°fica°ons for
firmware and documenta°on updates at
www.lantronix.com/product
-
registra°on
.
EDS3000PS
Quick Start
Accessories
Part Number
Power Cord, 125 V
AC/10 A
-
6 ſt cord length
500
-
215
-
R
Networking cable, RJ45
-
DB9
Female Cable to DTE
Device,
6 ſt length
500
-
103
-
R
START
WHAT
’
S IN THE BOX
1.
Power off the serial device that will be connected to the EDS3000PS.
2.
A±ach a RJ 45 serial cable between the EDS3000PS and your serial
device.
3.
Connect an CAT5E Ethernet cable between the EDS3000PS Ethernet
port and your Ethernet network.
4.
Connect the power cord and apply power.
5.
Power up the serial device.
EDS3008PS, EDS3016PS
Other adapters are available and are sold
separately.
LEDs
Descrip°on
Transmit (Green)
Blinking = EDS is transmi²ng data on the
serial port.
Receive (Orange)
Blinking = EDS is receiving data on the
serial port.
Diagnos°c (Green)
Fast blink= Ini°al startup, loading OS.
Slow blink (once per second) = Opera°ng
system startup.
ON = Unit has finished boo°ng.
Power (Blue)
ON = EDS is receiving power.
Ethernet LEDs
Leſt LED
Right LED
Descrip°on
OFF
OFF
No Link
ON
OFF
Link 10Mbps or 100Mbps
Blinking
OFF
Ac°vity 10Mbps
or 100Mbps
ON
ON
Link 1000Mbps
Blinking
ON
Ac°vity 1000Mbps
EDS3016PS Back View
RJ45 Serial Port
Power Connector
Reset Switch
RJ45 Ethernet Port
EDS3016PS Front View
Power LED
Transmit LED
Receive LED
Diagnos°c LED
Console Port
Ethernet LEDs